User's Manual

470 | Operator Logins Dell Networking W-ClearPass Guest 6.4 | User Guide
Testing Connectivity
To test network connectivity between an LDAP server and the W-ClearPass Guest server, click the Ping link
in the server’s row. The results of the test appear below the server entry in the LDAP server table.
Testing Operator Login Authentication
1. To test authentication of operator login values, select a server name in the LDAP Server table, then click the
Test Auth link. The Test Operator Login form is added to the page.
2. Enter an operator username and password for the LDAP Server. The minimum password length is six
characters.
3. (Optional) Click the Advanced check box to display detailed authorization information for the specified
operator.
4. Click Log In to attempt to authenticate the LDAP server, or click Cancel to cancel the test. The
Authentication Test area is added above the server names to indicate the test’s progress.
You can also verify operator authentication when you create a new LDAP server configuration using the
Test Settings button on the LDAP Configuration form (See "Creating an LDAP Server" on page 467 for a
description).
Looking Up Sponsor Names
This option is only available if sponsor lookup has been enabled for the server on the Edit Authentication
Server page.