User's Manual

508 | Reference Dell Networking W-ClearPass Guest 6.4 | User Guide
Field Description
l “random_password” to use the password specified in the random_password
field;
l “reset” to create a new password, using the method specified in the
random_password_method field (or the global defaults, if no value is
available in this field);
l “password” to use the value from the password field;
l Any other value leaves the password unmodified.
This field controls account creation and modification behavior; it is not stored
with created or modified visitor accounts.
modify_schedule_time String. Value indicating how to modify the schedule_time field.
It may be one of the following values:
l “none” to disable the account activation time;
l “now” to activate the account immediately;
l “schedule_time” to use the activation time specified in the schedule_time
form field (normally a UNIX time, but may be 0 to disable activation time);
l “schedule_after” to set the activation time to the current time plus the
number of hours in the schedule_after field;
l “plus X”, where X is a time measurement, to extend the activation time by X.
The time measurement is normally hours, but may have a “ywdhms” suffix to
indicate years, weeks, days, hours, minutes, or seconds, respectively.
Alternatively, this operation may be written equivalently as ‘+X’, ‘pX’, ‘plusX’,
‘add X’, ‘addX’, or ‘aX’. Example: to delay activation time by 2 days, use the
value +2d.
l “minus X”, where X is a time measurement, to reduce the activation time by
X. See above for details about specifying a time measurement. Alternatively,
this operation may be written equivalently as ‘-X’, ‘mX’, ‘minusX’, ‘sub X’,
‘subX’, or ‘sX’. Example: to bring forward activation time by 12 hours, use the
value -12h.
l A time measurement “X”, to set the activation time to the current time plus X.
l A time and date specification, to set the activation time to that time and
date. Many different formats are specified; for clarity it is recommended
that a standard format such as ISO-8601 is used (“YYYY-MM-DD hh:mm:ss”
format).
l Any other value to leave schedule_time unmodified.
This field controls account creation and modification behavior; it is not stored
with created or modified visitor accounts.
multi_initial_sequence Integer. Initial sequence number. This field is used when creating guest
accounts and the random_username_method field is set to “nwa_sequence”. If
this field is not set, the next available sequence number for the given multi_
prefix is used. Sequence numbering will start with 0 if no initial sequence
number has been set.
multi_prefix String. The prefix of each username generated when creating guest accounts
and the random_username_method field is set to “nwa_sequence”.
netmask String. Network address mask to use for stations using the account. This field
may be up to 20 characters in length. The value of this field is not currently used
by the system. However, a RADIUS user role may be configured to assign
network masks using this field by adding the Framed-IP-Netmask attribute, and
setting the value for the attribute to: <?= $user["netmask"]
no_password Boolean. If set, prevents a user from changing their own password using the
guest self-service portal. Set this field to a non-zero value or a non-empty string
to disable guest-initiated password changes. The default is to allow guest-
initiated password changes, unless this field is set.