Messages Reference Guide

12 | Security Messages Dell Networking W-Series Instant Access Point 6.2.1.0-3.4 | Syslog Messages Reference Guide
121029 RADIUS: Error [errno:%d], [errstr:%s] creating rfc3576 socket.
Description: Internal error occurred while initiating connection with RADIUS server.
Recommended Action: If the problem persits, contact your support provider.
121030 RADIUS: Error [errno:%d], [errstr:%s] in rfc3576 bind.
Description: Error occurred while connecting to RADIUS server.
Recommended Action: If the problem persists, contact your support provider.
121033 “rc_pack_list: Attribute list exceeds 8192 bytes, dropping request
Description: rc_pack_list: Attribute list exceeds 8192 bytes, dropping request
121036 RADIUS: Error [errno:%d],[errstr:%s] setting client socket options.
Description: Internal error occurred while setting connection options with the RADIUS
server.
Recommended Action: Contact Aruba technical support if this problem persists.
121047 Failed to add user Port ID in the Radius Accounting Pkt [pkt:%s].
Description: This shows an internal debug message
121048 Unknown result type [resultType:%d].
Description: This shows an internal debug message
121049 Failed to add user Port ID in the Radius Accounting Start Pkt [portStr:%s].
Description: This shows an internal debug message
132003 xSec vlan not configured for [port:%s]
Description: xSec vlan is not configured for the specified port.
Recommended Action: Configure VLAN that supports XSEC on specified port..
132004 Unknown AP [mac:%m] [bssid:%m] [menc:%s] [vlan:%d].
Description: Authentication process has detected an unknown AP.
Recommended Action: Execute the show ap database command to determine if
system is aware of the Access Point. Power-cycle the unknown AP.
132005 AP [mac:%m] [apname:%s] is not enabled.
Description: Specified AP is not enabled.
Recommended Action: Configure AP with a valid virtual-AP or wired profile..
132006 Station Add failed [mac:%m] [bssid:%m] [apname:%s] [uenc:%s] [menc:%s]
Description: Station failed to complete the security association with authentication
process.
Recommended Action: Confirm that the SSID that the supplicant is associating to is
configured to support 802.1X authentication and is configured correctly..
132008 Station delete failed, does not exists in the station table.
Description: Failed to clear the station from the AP’s station table.
Recommended Action: Station does not exist in authentication process tables.
Confirm by running the show station command.
132009 Station’s dot1x context not initialized [name:%s] [mac:%m] [bssid:%m]
Description: Station’s internal context is not completely initialized.
Recommended Action: Internal error. Clear the station by running the aaa user delete
command and reconnect.
Table 5 Security Error Messages (Continued)
Message ID Message and Description