Messages Reference Guide

32 | System Messages Dell Networking W-Series Instant Access Point 6.2.1.0-3.4 | Syslog Messages Reference Guide
330209 An internal system error has occurred at file [file:%s] function [function:%s] line
[line:%d].
Description: This log indicates that we encountered an internal system error.
Recommended Action: Contact your support provider
330210 An internal system error has occurred at file [file:%s] function [function:%s] line [line:%d]
error [error:%s].
Description: This log indicates that we encountered an internal system error.
Recommended Action: Contact your support provider
330211 Error allocating memory at file [file:%s] function [function:%s] line [line:%d]. Allocating
[bytes:%d] bytes.
Description: System failed to allocate memory at the specified location
Recommended Action: Use the show memory and show process command to
monitor memory usage. If the problem persist, contact your support provider
330212 System encountered an internal communication error. Error occurred when message is
being sent from source application [src:%s] destination application [dst:%s] at file
[file:%s] function [func:%s] line [line:%d].
Description: This log indicates that application processes in the system encountered
an error sending messages to each other. This could be a transient condition and the
problem might go away.
Recommended Action: IIf the problem persist, contact your support provider
341005 [msg:%s]
Description: No description available.
341023 Error setting global LED mode at [node:%s].
Description: The AP is configuring LED mode.
341026 Fail to save configuration, error-[error:%s].
Description: The AP is saving configuration .
341027 Fail to initial configuration, error-[error:%s].
Description: The AP is initialing configuration .
341028 Image version format invalid: [version:%s].
Description: The AP is upgrading image.
341029 Compare image version fail, old version-[old_version:%s], current version-
[new_version:%s].
Description: The AP is upgrading image.
341030 Upgrade version fail, from version [old_version:%s] to [new_version:%s].
Description: The AP is upgrading image.
341031 Retrieve image fail, retry [time:%d].
Description: The AP is loading configuration.
341033 Read configuration fail, error-[error:%s].
Description: The AP is loading configuration.
341034 Save configuration fail, error-[error:%s].
Description: The AP is saving configuration.
Table 13 Error System Messages (Continued)
Message ID Message and Description