Messages Reference Guide

Dell Networking W-Series Instant Access Point 6.2.1.0-3.4 | Syslog Messages Reference Guide User Messages | 69
501162 Update dhcp-opt: [mac:%m] Update dhcp-opt [vlan:%d] [vlanhow:%s] [role:%d]
rule_index [index:%x] essid [essid:%s] to cli0 msg.
Description: This log indicates that update user dhcp-opt information to CLI.
501163 Send user role info: mac-[mac:%m], acl-[acl:%d].
Description: No description available.
501164 Receive disconnect user, mac-[mac:%m], bssid-[bssid:%m], logout-[logout:%d],
deauth-[deauth:%d], term-[trem:%d].
Description: This log indicates that we are receiving disconnect user message from
CLI0.
520001 \[[file:%s]:[line:%d]] [message:%s]
Description: aaa module’s debug message
501166 Rap bridge user msg, flags-[flags:%d] action-[action:%d] aclnum-[aclnum:%d] ip-
[ip:%p] mac-[mac:%m],bssid-[bssid:%m] vlan-[vlan:%d] wired-[wired:%d].
Description: This log indicates that stm received ASAP_STM_BRIDGE_USER message
501168 Receive user acct req, mac-[mac:%m], bssid-[bssid:%m], acctreq-[acctreq:%d], term-
[trem:%d].
Description: This log indicates that we are receiving user acct req msg from cli0.
501169 Receive user accounting info: mac-[mac:%m], status-[status:%d], inocts-[inocts:%d],
outocts-[outocts:%d], inpkts-[inpkts:%d], outpkts-[outpkts:%d], sesstim-[sesstim:%d],
sessid-[sessid:%s], multisessid-[multisessid:%s].
Description: This log indicates that we are sending user acct info to cli0.
501170 Send user accounting info: mac-[mac:%m], status-[status:%d], inocts-[inocts:%d],
outocts-[outocts:%d], inpkts-[inpkts:%d], outpkts-[outpkts:%d], sesstim-[sesstim:%d],
sessid-[sessid:%s], multisessid-[multisessid:%s].
Description: This log indicates that we are sending user acct info to cli0.
524000 Skipping disable operation, opcode:0x[address:%x] not registered.
Description: This shows an internal user debug message.
524001 cert id [certid:%d] tun id [tuneid:%d].
Description: This shows an internal user debug message.
524002 Download was skipped
Description: This shows an internal user debug message.
524003 Dot1x- Default profile cert id:[certid:%d].
Description: This shows an internal user debug message.
524004 Dot1x- Download time ID :[certid:%d],[certname:%s],[caname:%s]
Description: This shows an internal user debug message
524011 Src ip:[src:%s],Dst ip:[dst:%s],offset= [offset:%d] flags:=[flags:%d] Fragmented Packet
Description: This shows an internal user debug message
524012 Fragment Length [fraglen:%d]
Description: This shows an internal user debug message
Table 22 User Debug Messages
Message ID Message and Description