Users Guide

6. Reinstall the jumper plug on the PASSWD jumper.
7. Replace the computer cover, and then reconnect the computer and peripherals to electrical outlets and turn them
on.
8. Assign a new system or setup password.
To assign a new system password using the System Setup program, see "Assigning a System Password" in your User's
Guide. To assign a new setup password using the System Setup program, see "Assigning a Setup Password" in the
User's Guide.
System Board Labels
Table 2, System Board Connectors and Sockets, lists the labels for connectors and sockets on your system board and
gives a brief description of their functions.
Table 2. System Board Connectors and Sockets
Connector or Socket Description
SVR_MGT Server management bus connector (for the Dell Remote Assistant Card)
AUX_LED Hard-disk drive access indicator connector
BATTERY Battery socket
COMn Serial port connectors
DIMM_x DIMM socket
DISKETTE Diskette drive interface connector
FAN Microprocessor fan connector
IDEn EIDE interface connector
ISA6* ISA expansion-card connector
KYBD/MOUSE Keyboard connector and mouse connector (stacked)
PANEL Control panel connector
PARALLEL Parallel port connector (sometimes referred to as LPT1)
PCIn* PCI expansion-card connectors
POWER_1 Main power input connector
SCSI_ULTRA2 SCSI connector
SLOT1_PRI Primary Intel
®
Pentium
®
II processor SEC cartridge connector
SLOT1_SEC Secondary Pentium II processor SEC cartridge connector
USB USB connectors
VGA video connector
* The connector pair ISA6/PCI6 share a single card-slot opening so that only one connector of the pair can be