Users Guide

Responding to Error Messages
If an error message appears on your monitor screen while the system is booting, make a note of the message. Then,
before entering the System Setup program, refer to "System Beep Codes" and "System Messages" in your Installation
and Troubleshooting Guide for an explanation of the message and suggestions for correcting any errors. (An exception
to this routine: It is normal to receive an error message the first time you boot your system after installing a memory
upgrade. In that situation, do not refer to "System Beep Codes" and "System Messages." Instead, follow the instructions
in "Performing a Memory Upgrade" in your Installation and Troubleshooting Guide.)
If you are given an option of pressing either <F1> to continue or <F2> to run the System Setup program, press the <F2>
key.
Back to Contents Page