Dell™ PowerEdge™ 1900 Systems Information Update w w w. d e l l . c o m | s u p p o r t . d e l l .
Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. ____________________ Information in this document is subject to change without notice. © 2006-2009 Dell Inc. All rights reserved.
This document provides updated information for your system on the following topics: • Quad-core processor upgrades • Memory mirroring with fully buffered DIMMs • System message update • LCD status messages update • System Setup program update • Memory capacity reporting • Installing a PERC5i SAS RAID controller Quad-Core Processor Upgrades If the front of your system chassis is labeled with a "II," your system is upgradeable to the Quad-Core Intel® Xeon® Processor 5300 series when these proces
Table 1-1. System Messages Message Causes The FBD link to the An error has occurred on the FBD following DIMM failed to channel that contains the specified train: DIMM x DIMM. A fault is indicated on the FBD training error - The link adjacent to the DIMM caused following memory branch by a faulty condition in either the specified DIMM, the next DIMM has been disabled: in the channel, or possibly the Branch x system board.
System Setup Program Update This section lists updates to the System Setup program about features that are available on some systems. Main Screen Figure 1-1 shows the updated main System Setup program screen. Table 1-3 lists a new option on the System Setup main screen. Figure 1-1. Main System Setup Program Screen Table 1-3. System Setup Program Options Option Description Boot Sequence Retry (Disabled default) Enables or disables the Boot Sequence Retry feature.
Integrated Devices Screen Table 1-4 lists a new Integrated Devices screen option. Table 1-4. Integrated Devices Screen Options Option Description I/OAT DMA Engine (Disabled default) Enables or disables the I/O Acceleration Technology (I/OAT) option. When set to Enabled, I/OAT reduces system CPU usage for applications that use TCP by offloading part of the TCP receive operation to the DMA engine. Memory Screen Table 1-5 lists a new option on the Memory screen. Table 1-5.
Figure 1-2.
Information Update
Dell™ PowerEdge™ 1900 系统 信息更新 w w w. d e l l . c o m | s u p p o r t . d e l l .
注、注意和小心 注: “注”表示可以帮助您更好地使用计算机的重要信息。 . 注意: “注意”表示会损坏硬件或导致数据丢失的潜在危险,并告诉您如何避免此类问题。 小心: “小心”表示可能会导致财产损失、人身伤害甚至死亡。 ____________________ 本说明文件中的信息如有更改,恕不另行通知。 © 2006-2009 Dell Inc. 版权所有,翻版必究。 未经 Dell Inc. 书面许可,严禁以任何形式复制这些材料。 本文中使用的商标:Dell、 DELL 徽标和 PowerEdge 是 Dell Inc. 的商标; Intel 和 Xeon 是 Intel Corporation 的注册商标。本说明文 件中述及的其它商标和产品名称是指拥有相应商标和产品名称的公司或其制造的产品。 Dell Inc. 对本公司的商标和产品名称之外 的其它商标和产品名称不拥有任何专有权。 2009 年 5 月 P/N FF602 Rev.
本说明文件针对您的系统提供了有关以下主题的更新信息: • 四核处理器升级 • 全缓冲 DIMM 的内存镜像 • 系统信息更新 • LCD 状态信息更新 • 系统设置程序更新 • 内存容量报告 • 安装 PERC5i SAS RAID 控制器 四核处理器升级 如果系统机箱的正面标有 “II”字样,则该系统可升级至四核 Intel® Xeon® 5300 系列处理器 (当这些处理器发布时)。有关处理器发布情况以及适用于您的系统的升级选项的信息,请参阅 support.dell.
系统信息更新 表 1-1 列出了新系统信息以及出现这些信息的可能原因和纠正措施。系统信息显示在屏幕上,通知 您系统可能存在的问题。 警告:只有经过培训的维修技术人员才能卸下系统护盖并拆装系统内部的任何组件。有关安全预防措 施、拆装计算机内部组件以及防止静电损害的完整信息,请参阅 《产品信息指南》。 表 1-1.
系统设置程序更新 这部分列出了系统设置程序中某些功能 (部分系统提供)的更新。 主屏幕 图 1-1 显示了更新过的系统设置程序主屏幕。表 1-3 列出了系统设置程序主屏幕上的新选项。 图 1-1. 系统设置程序主屏幕 表 1-3.
Integrated Devices (集成设备)屏幕 表 1-4 列出了 Integrated Devices (集成设备)屏幕的新选项。 表 1-4. Integrated Devices (集成设备)屏幕选项 选项 说明 I/OAT DMA Engine (I/OAT DMA 引擎) (默认设置为 Disabled [ 已禁用 ]) 启用或禁用 I/O Acceleration Technology (I/OAT) (I/O 加速技术 [I/OAT]) 选项。如果设置为 Enabled (已启用),对于使用 TCP 的应用程序, I/OAT 通 过将部分 TCP 接收操作减负到 DMA 引擎,以减少系统 CPU 的使用。 Memory (内存)屏幕 表 1-5 列出了 Memory (内存)屏幕的新选项。 表 1-5.
安装 PERC5i SAS RAID 控制器 可选 SAS RAID 控制器允许在您的系统中使用最多六个硬盘驱动器。使用 SAS RAID 控制器配置系 统时,请确保驱动器 0-3 的信号电缆连接至 SAS RAID 控制器上的 SAS_0 连接器,驱动器 4 和 5 的 电缆连接至 SAS_1 连接器 (请参阅图 1-2)。 图 1-2.
信息更新
Systèmes Dell™ PowerEdge™ 1900 Mise à jour des informations w w w. d e l l . c o m | s u p p o r t . d e l l .
Remarques, avis et précautions REMARQUE : Une REMARQUE indique des informations importantes qui peuvent vous aider à mieux utiliser votre ordinateur. AVIS : Un AVIS vous avertit d'un risque de dommage matériel ou de perte de données et vous indique comment éviter le problème. PRÉCAUTION : une PRÉCAUTION vous avertit d'un risque d'endommagement du matériel, de blessure corporelle ou de mort. ____________________ Les informations contenues dans ce document sont sujettes à modification sans préavis.
Ce document contient une mise à jour des informations portant sur les sujets suivants : • Mise à niveau via l'installation de processeurs quadruple cœur • Utilisation de barrettes FB-DIMM pour la mise en miroir de la mémoire • Mise à jour des messages système • Mise à jour concernant les messages d'état de l'écran LCD • Mise à jour concernant le programme de configuration du système • Affichage des capacités de mémoire • Installation d'un contrôleur PERC5i RAID SAS Mise à niveau via l'installa
Mise à jour des messages système Le tableau 1-1 présente un nouveau message système et indique sa cause probable et les mesures correctives appropriées. Le système affiche des messages d'erreur pour informer l'utilisateur qu'un incident s'est produit. PRÉCAUTION : Seuls les techniciens de maintenance qualifiés sont habilités à retirer le capot du système pour accéder aux composants internes.
Mise à jour concernant les messages d'état affichés sur l'écran LCD Le tableau 1-2 répertorie les nouveaux messages d'état susceptibles de s'afficher sur l'écran LCD et indique leur cause probable. Les messages de l'écran LCD se rapportent aux éléments enregistrés dans le journal des événements du système. Pour plus d'informations sur ce journal et sur la configuration des paramètres de gestion du système, consultez la documentation du logiciel de gestion de systèmes. Tableau 1-2.
Mise à jour du programme de configuration du système Cette section présente les mises à jour apportées au programme de configuration du système pour des fonctions disponibles sur certains modèles. Écran principal La figure 1-1 représente le nouvel écran principal du programme de configuration du système. Le tableau 1-3 présente une nouvelle option qui a été ajoutée à cet écran. Figure 1-1. Écran principal du programme de configuration du système Tableau 1-3.
Écran Integrated Devices (Périphériques intégrés) Le tableau 1-4 présente une nouvelle option qui a été ajoutée à cet écran. Tableau 1-4. Options de l'écran Integrated Devices (Périphériques intégrés) Option Description I/OAT DMA Engine (Option par défaut : Disabled [Désactivé]) Active ou désactive la technologie d'accélération des E/S (I/OAT).
Affichage des capacités de mémoire Le logiciel de gestion des systèmes peut afficher des capacités de mémoire système incorrectes. Dans l'écran des attributs de la baie de mémoire, la capacité affichée peut être double de la capacité réelle. Pour corriger cela, rendez-vous sur le site support.dell.com et téléchargez, puis installez la dernière mise à niveau du BIOS correspondant à votre système.
Figure 1-2.
Mise à jour des informations
Dell™ PowerEdge™ 1900-Systeme Aktuelle Informationen w w w. d e l l . c o m | s u p p o r t . d e l l .
Anmerkungen, Hinweise und Vorsichtshinweise ANMERKUNG: Eine ANMERKUNG macht auf wichtige Informationen aufmerksam, mit denen Sie das System besser einsetzen können. HINWEIS: Ein HINWEIS warnt vor möglichen Beschädigungen der Hardware oder vor Datenverlust und zeigt auf, wie derartige Probleme vermieden werden können. VORSICHT: Mit einem VORSICHTSHINWEIS werden Sie auf eine potenziell gefährliche Situation hingewiesen, die zu Sachschäden, Verletzungen oder zum Tod führen könnte.
Dieses Dokument enthält aktuelle Informationen zum System.
Aktualisierte Systemmeldungen Tabelle 1-1 enthält eine neue Systemmeldung sowie die wahrscheinliche Ursache und die Korrekturmaßnahme, wenn die Meldung angezeigt wird. Systemmeldungen werden auf dem Bildschirm angezeigt, um Sie auf mögliche Systemprobleme aufmerksam zu machen. VORSICHT: Nur ausgebildete Service-Techniker dürfen die Gehäuseabdeckung entfernen und auf die Komponenten im Inneren des Systems zugreifen.
Ergänzende Informationen zu LCD-Statusmeldungen In Tabelle 1-2 sind die aktualisierten LCD-Statusmeldungen sowie die jeweils mögliche Ursache aufgeführt. Die LCD-Meldungen beziehen sich auf Ereignisse, die im Systemereignisprotokoll (System Event Log = SEL) aufgezeichnet werden. Informationen über das SEL und über die Konfiguration der Systemverwaltungseinstellungen finden Sie in der Dokumentation der Systemverwaltungssoftware. Tabelle 1-2.
Aktualisierung des System-Setup-Programms Dieser Abschnitt enthält Aktualisierungen des System-Setup-Programms zu Funktionen, die bei bestimmten Systemen verfügbar sind. Hauptbildschirm Abbildung 1-1 zeigt den aktualisierten Bildschirm des System-Setup-Programms. Tabelle 1-3 enthält eine neue Option im Hauptbildschirm des System-Setups. Abbildung 1-1. Hauptbildschirm des System-Setup-Programms Tabelle 1-3.
Bildschirm „Integrated Devices“ (Integrierte Geräte) Tabelle 1-4 enthält eine neue Option im Bildschirm Integrated Devices (Integrierte Geräte). Tabelle 1-4. Optionen des Bildschirms „Integrated Devices“ (Integrierte Geräte) Option Beschreibung I/OAT DMA Engine (Standardeinstellung Disabled) Aktiviert oder deaktiviert die Option für I/O Acceleration Technology (I/OAT).
Meldung von Speicherkapazität Die Systemverwaltungssoftware meldet eventuell eine falsche Speicherkapazität für das System. Im Attribute-Fenster des Arbeitsspeicher-Arrays wird möglicherweise das Dopppelte der tatsächlichen Kapazität angegeben. Um dieses Problem zu beheben, rufen Sie support.dell.com auf, und laden und installieren Sie das aktuelle Upgrade für das System-BIOS.
Abbildung 1-2.
Aktuelle Informationen
Dell™ PowerEdge™ 1900 システム アップデート情報 w w w. d e l l . c o m | s u p p o r t . d e l l .
メモ、注意、警告 メモ:コンピュータを使いやすくするための重要な情報を説明しています。 注意:ハードウェアの損傷やデータの損失の可能性を示し、その危険を回避するための方法を説明してい ます。 警告 : 物的損害、けが、または死亡の原因となる可能性があることを示しています。 ____________________ 本書の内容は予告なく変更されることがあります。 © 2006 ~ 2009 すべての著作権は Dell Inc. にあります。 Dell Inc. の書面による許可のない複製は、いかなる形態においても厳重に禁じられています。 本書に使用されている商標:Dell、DELL ロゴ、および PowerEdge は Dell Inc. の商標です。Intel および Xeon は Intel Corporation の登録商標です。商標または製品の権利を主張する事業体を表すためにその他の商標および社名が使用されてい ることがあります。Dell Inc. はデル以外の商標や社名に対する所有権を一切否認します。 2009 年 5 月 P/N FF602 Rev.
本書では、以下のトピックについて、お使いのシステムに関するアップデート情報を提供し ます。 • クアッドコアプロセッサのアップグレード • 完全バッファ型 DIMM によるメモリのミラーリング • システムメッセージに関するアップデート情報 • LCD ステータスメッセージに関するアップデート情報 • セットアップユーティリティに関するアップデート情報 • メモリ容量レポート • PERC5i SAS RAID コントローラの取り付け クアッドコアプロセッサのアップグレード システムシャーシの前面に「II」のラベルがある場合、お使いのシステムは、クアッドコア Intel® Xeon® 5300 シリーズのプロセッサが利用可能になった段階で、そのシリーズのプロセッ サにアップグレードできます。お使いのシステムで利用できるプロセッサとアップグレードオプ ションについては、support.dell.
システムメッセージに関するアップデート情報 新しいシステムメッセージ、およびメッセージが表示された場合の考えられる原因と対応処置の リストを 表 1-1 に示します。システムに問題がある可能性が検出されると、システムメッセー ジが画面に表示されます。 警告:システムのカバーを取り外して内部の部品に手を触れる作業は、トレーニングを受けたサービ ス技術者のみが行ってください。安全上の注意、コンピュータ内部の作業、および静電気障害への対 処の詳細については、『製品情報ガイド』を参照してください。 表 1-1 システムメッセージ メッセージ 原因 The FBD link to the following DIMM failed to train: DIMM x 表示された DIMM を持つ FBD 表示されている FBD チャネル上のす チャネルにエラーが発生した。 べての DIMM を抜き差しします。FBD 表示された DIMM、チャネル内 ブランチとチャネルについては、 の隣の DIMM、または場合によ 『ハードウェアオーナーズマニュアル』 りシステム基板に生じた障害が の「メモリ」を参照してください。
LCD ステータスメッセージに関するアップデート情報 LCD ステータスメッセージとその考えられる原因のアップデート情報を 表 1-2 に示します。 LCD メッセージは、システムイベントログ(SEL)に記録されたイベントに基づきます。SEL お よびシステム管理設定の詳細については、システム管理ソフトウェアのマニュアルを参照してく ださい。 表 1-2 LCD ステータスメッセージ コード メッセージ 原因 対応処置 E1118 CPU Temp Interface BMC が CPU の温度状況を判定でき ない。そのため、BMC は予防措置 として CPU ファンの速度を最大に する。 システムの電源を切り、再度電源 を入れます。問題が解決しない場 合は、『ハードウェアオーナーズ マニュアル』の「困ったときは」 を参照してください。 E122B 0.9 V Over Voltage 0.
図 1-1 セットアップユーティリティのメイン画面 表 1-3 セットアップユーティリティのオプション オプション Boot Sequence Retry (デフォルトは Disabled) 説明 Boot Sequence Retry(起動順序再試行)機能の有効 / 無効を切り替えます。 Enabled(有効)に設定しておくと、前回の起動が失敗した場合、30 秒の タイムアウト後に、システムは起動順序を再試行します。 Integrated Devices(内蔵デバイス)画面 新しくなった Integrated Devices(内蔵デバイス)画面のオプションを 表 1-4 に示します。 表 1-4 Integrated Devices(内蔵デバイス)画面のオプション オプション I/OAT DMA Engine (デフォルトは Disabled) 42 アップデート情報 説明 I/O アクセラレーションテクノロジ(I/OAT)オプションの有効 / 無効を切り 替えます。Enabled(有効)に設定すると、I/OAT は、TCP 受信処理の一部 を DMA エンジンにオフロードすることによって、TC
メモリ画面 Memory(メモリ)画面の新しいオプションを 表 1-5 に示します。 表 1-5 Memory(メモリ)画面のオプション オプション Low Power Mode (デフォルトは Disabled) 説明 メモリの Low Power Mode(節電モード)の有効 / 無効を切り替えます。 Enabled(有効)に設定すると、メモリは節電のために低速で動作します。 Disabled(無効)に設定すると、メモリは最大速度で動作します。 Serial Communication(シリアル通信)画面 デフォルトの Failsafe Baud Rate(フェイルセーフボーレート)に関するアップデート情報を 表 1-6 に示します。 表 1-6 Serial Communication(シリアル通信)画面のオプション オプション 説明 Failsafe Baud Rate ボーレートがリモートターミナルによって自動的にネゴシエートできない場 (デフォルトは 115200) 合にコンソールリダイレクションに使用されるフェイルセーフボーレートを 表示します。このレートは調節しないでください。 メモ
図 1-2 ハードドライブ 6 台の構成(SAS RAID コントローラドーターカード) 2 1 3 4 5 6 7 8 44 1 ハードドライブ動作インジ ケータのシステム基板コネ クタ(HD_ACT_CARD) 2 SAS RAID コントローラドー 3 ターカードのバッテリーコ ネクタ 4 ハードドライブ LED 動作イ ンジケータのケーブルコネ クタ 5 SAS_0 コネクタ 7 ハードドライブインタ フェースケーブルコネクタ 8 ハードドライブ電源コネ クタ アップデート情報 6 SAS_1 コネクタ センターファンの固定ケ ージ
Dell™ PowerEdge™ 1900 Systems 정보 갱신본 w w w. d e l l . c o m | s u p p o r t . d e l l .
주 , 주의사항 및 주의 주: "주"는 컴퓨터를 보다 효율적으로 사용하는 데 도움을 주는 중요 정보를 제공합니다. 주의사항: 주의사항은 하드웨어 손상 또는 데이터 유실 위험을 설명하며, 이러한 문제를 방지할 수 있는 방법 을 알려줍니다. 주의: 주의는 재산상의 피해나 심각한 부상 또는 사망을 유발할 수 있는 우려가 있음을 알려 줍니다. ____________________ 이 문서의 정보는 사전 통보 없이 변경될 수 있습니다. © 2006-2009 Dell Inc. 저작권 본사 소유. Dell Inc.의 서면 승인 없이 어떠한 경우에도 무단 복제하는 것을 엄격히 금합니다. 본 설명서에 사용된 상표인 Dell, DELL 로고 및 PowerEdge는 Dell Inc.의 상표이며, Intel 및 Xeon은 미국 및 기타 국가에서 Intel Corporation의 등록 상표입니다. 본 문서에서 특정 회사의 표시나 제품 이름을 지칭하기 위해 기타 상표나 상호를 사용할 수도 있습 니다. Dell Inc.
본 설명서는 다음 내용에 관한 시스템의 최신 정보에 대해 설명합니다 . • 쿼드 코어 프로세서 업그레이드 • FBD (Fully Buffered DIMM) 의 메모리 미러링 • 시스템 메시지 업데이트 • LCD 상태 메시지 업데이트 • 시스템 설치 프로그램 업데이트 • 메모리 용량 보고 • PERC5i SAS RAID 컨트롤러 설치 쿼드 코어 프로세서 업그레이드 시스템 섀시 앞의 레이블에 "II" 가 있으면 해당 프로세서를 가진 경우 시스템을 쿼드 코어 Intel® Xeon® Processor 5300 시리즈로 업그레이드할 수 있습니다 . 프로세서 가용성 및 업그레이드 옵션에 대한 내용은 support.dell.com 을 참조하십시오 .
시스템 메시지 업데이트 표 1-1 에는 새 시스템 메시지 및 메시지가 나타나는 원인 및 수정 조치가 나와 있습니다 . 시스템 메 시지가 화면에 표시되어 시스템의 발생 가능한 문제를 알려줍니다 . 주의 : 숙련된 서비스 기술자만 시스템 덮개를 분리하고 시스템 내부의 구성요소에 액세스해야 합니다 . 안전 지침 , 컴퓨터 내부 작업 및 정전기 방전 방지에 대한 자세한 내용은 제품 정보 안내를 참조하십시오 . 표 1-1. 시스템 메시지 메시지 원인 The FBD link to the 지정한 DIMM 을 포함한 FBD 채 following DIMM failed to 널에서 오류가 발생했습니다 . 지 train: DIMM x 정한 DIMM, 채널의 다음 DIMM FBD training error - The 또는 시스템 보드의 오류 상태로 following memory branch 인해 발생한 오류가 DIMM 에 인 접한 링크에 나타납니다 .
시스템 설치 프로그램 업데이트 이 항목에는 일부 시스템에서 사용할 수 있는 기능에 대한 시스템 설치 프로그램 업데이트가 나열됩 니다 . 기본 화면 그림 1-1 에서는 업데이트된 기본 시스템 설치 프로그램 화면을 보여 줍니다 . 표 1-3 에서는 시스템 설치 기본 화면의 새 옵션에 대해 설명합니다 . 그림 1-1. 시스템 설치 프로그램 기본 화면 표 1-3. 시스템 설치 프로그램 옵션 옵션 설명 Boot Sequence Retry ( 부팅 순서 재시도 ) ( 기본값 : Disabled ( 비활성화 )) 부팅 순서 재시도 기능을 활성화하거나 비활성화합니다 . Enabled( 활성화 ) 로 설정하는 경우 이전 부팅 시도가 실패하면 시스템은 30 초의 시간 제한 후 부팅 순서를 재시도합니다 .
통합 장치 화면 표 1-4 에서는 새로운 내장형 장치 화면 옵션에 대해 설명합니다 . 표 1-4. 내장형 장치 화면 옵션 옵션 설명 I/OAT DMA Engine (I/OAT DMA 엔진 ) ( 기본값 : Disabled ( 비활성화 )) I/OAT(I/O Acceleration Technology) 옵션을 활성화 또는 비활성화합니다 . Enabled( 활성화 ) 로 설정되어 있으면 I/OAT 가 DMA 엔진에 대한 TCP 수신 동 작의 일부를 오프로드하여 TCP 를 사용하는 응용프로그램에 대한 시스템 CPU 사용량을 줄입니다 . 메모리 화면 표 1-5 에서는 메모리 화면의 새 옵션에 대해 설명합니다 . 표 1-5. 메모리 화면 옵션 옵션 설명 Low Power Mode ( 저전원 모드 ) ( 기본값 : Disabled ( 비활성화 )) 메모리의 저전원 모드를 활성화하거나 비활성화합니다 . Enabled( 활성화 ) 로 설 정할 경우 메모리가 느리게 작동하여 전원을 절약합니다 .
메모리 용량 보고 시스템 관리 소프트웨어는 시스템의 메모리 용량을 잘못 보고할 수 있습니다 . 메모리 배열의 특성 화면에서 용량은 실제 용량의 두 배로 표시될 수 있습니다 . 이 문제를 해결하려면 support.dell.com 에서 시스템의 최신 시스템 BIOS 업그레이드를 다운로드 및 설치하십시오 . PERC5i SAS RAID 컨트롤러 설치 선택사양인 SAS RAID 컨트롤러로 시스템에 하드 드라이브를 최대 6 개까지 장착할 수 있습니다 . SAS RAID 컨트롤러로 시스템을 구성할 때 드라이브 0 에서 3 까지의 신호 케이블이 SAS RAID 컨트 롤러의 SAS_0 커넥터에 연결되어 있고 드라이브 4 및 5 의 케이블이 SAS_1 커넥터에 연결되어 있는 지 확인하십시오 ( 그림 1-2 참조 ).
그림 1-2.
Sistemas Dell™ PowerEdge™ 1900 Actualización de información w w w. d e l l . c o m | s u p p o r t . d e l l .
Notas, avisos y precauciones NOTA: Una NOTA proporciona información importante que le ayudará a utilizar mejor el ordenador. AVISO: Un AVISO indica la posibilidad de daños en el hardware o la pérdida de datos, e informa de cómo evitar el problema. PRECAUCIÓN: Un mensaje de PRECAUCIÓN indica el riesgo de daños materiales, lesiones o incluso la muerte. ____________________ La información contenida en este documento puede modificarse sin previo aviso. © 2006-2009 Dell Inc. Todos los derechos reservados.
En este documento se proporciona información actualizada sobre los temas siguientes relativos al sistema: • Actualizaciones al procesador de cuatro núcleos • Duplicación de memoria con módulos DIMM con búfer completo • Actualización de los mensajes del sistema • Actualización de los mensajes de estado de la pantalla LCD • Actualización del programa de configuración del sistema • Informes de capacidad de memoria • Instalación de una controladora RAID SAS PERC5i Actualizaciones al procesador de
Actualización de los mensajes del sistema En la tabla 1-1 se describe un nuevo mensaje del sistema, así como la causa probable y la acción correctiva que debe llevarse a cabo cuando aparezca dicho mensaje. Los mensajes del sistema aparecen en la pantalla para notificar la posible existencia de un problema en el sistema. PRECAUCIÓN: Los técnicos de servicio especializados son las únicas personas autorizadas para retirar las cubiertas y acceder a los componentes internos del sistema.
Actualización de los mensajes de estado de la pantalla LCD En la tabla 1-2 se enumeran las actualizaciones de los mensajes de estado de la pantalla LCD que pueden producirse y el posible origen de cada mensaje. Los mensajes de la pantalla LCD se refieren a los eventos guardados en el registro de eventos del sistema (SEL). Para obtener información sobre el SEL y la configuración de las opciones de administración del sistema, consulte la documentación del software de administración de sistemas. Tabla 1-2.
Ilustración 1-1. Tabla 1-3. Pantalla principal del programa de configuración del sistema Opciones del programa de configuración del sistema Opción Descripción Boot Sequence Retry (valor predeterminado: Disabled) Habilita o deshabilita la función Boot Sequence Retry (Reintento de la secuencia de inicio). Si esta opción se establece en Enabled (Habilitado), el sistema reintenta la secuencia de inicio tras un tiempo de espera de 30 segundos si el intento de inicio anterior ha fallado.
Pantalla Memory En la tabla 1-5 se describe una nueva opción de la pantalla Memory (Memoria). Tabla 1-5. Opciones de la pantalla de memoria Opción Descripción Low Power Mode (valor predeterminado: Disabled) Habilita o deshabilita el modo de bajo consumo de la memoria. Si esta opción se establece en Enabled (Habilitado), la memoria funciona a una velocidad reducida para ahorrar energía. El valor Disabled (Deshabilitado) hace que la memoria funcione a velocidad completa.
Ilustración 1-2.