Reference Guide

8 General System Configuration

Figure 1-3. KVM Module Basic Configuration

If required, configure the hard drives for RAID 1 or integrated mirroring. Configure RAID 1

prior to installation of the operating system. See "Configuring Drive Mirroring" on page 9

for more information.

NOTE: If you ordered your server module configured for RAID 1, the drives in your server module

are already configured.

If required, set up console redirection on the server module to either the BMC or

to the DRAC/MC module serial port in the server module System Setup program.

See "Serial or Telnet Console Interface" on page 14.

1 monitor 2 custom KVM cable 3 KVM module

4 DRAC/MC module 5 mouse 6 keyboard