Setup Guide

Rack Installation Guide 13
CAUTION: It is recommended that more than one person assist in lifting the system.
NOTICE: It is recommended that you use a lift table to aid in installing the system in the rack, particularly
if the rail assemblies are more than waist-high.
1 Lift the system into position to install it in the rack.
It is recommended that more than one person assist in lifting the system.
2 Guide the system into the rack and lower the system onto the rail assemblies (see Figure 1-7).
3 Tighten the thumbscrews on the rack front panel.
Figure 1-7. Installing the System in the Rack
Routing Cables
1 Attach the I/O cable connectors and power cables to their respective connectors on the
system back panel. For details on cable connections, see your system’s
Getting Started Guide ,
Installation and Troubleshooting Guide , and User’s Guide .
NOTE: Use the strain-relief loops (if available) on the back of the power supplies to provide strain
relief for the power cables.
rail assemblies (2)
thumbscrews (4)