Dell™ PowerEdge™ 1955 Systems Information Update 信息更新 Mise à jour des informations Aktuelle Informationen アップデート情報 설명서 갱신본 Actualización de información w w w. d e l l . c o m | s u p p o r t . d e l l .
Dell™ PowerEdge™ 1955 Systems Information Update w w w. d e l l . c o m | s u p p o r t . d e l l .
Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. ____________________ Information in this document is subject to change without notice. © 2006 – 2007 Dell Inc. All rights reserved.
This document provides updated information for your system on the following topics: • Quad-core processor upgrades • NIC teaming restrictions • Fibre Channel pass-through module indicators • Monitor connections when installing an operating system • NIC activity LED • Throttling of server modules • Server-module board DIP switch settings • Console redirection information • Microsoft® Windows® 2000 Advanced Server operating system information • System diagnostics–NIC entry in PCI device lis
Fibre Channel Pass-Through Module Indicators The indicator patterns displayed on the optional Fibre Channel pass-through module are dependent on the specific Fibre Channel daughter card installed in the server module (blade). Cards currently supported by your system include the Dell 2342M, QME2462, and Emulex LPe1105-M cards. Table 1-1 details the status indicator patterns for these cards, and supersedes Table 1-11 in your Hardware Owner’s Manual. Table 1-1.
Server Module Board DIP Switch Table 1-2 lists all switch settings for the server-module DIP switch on the server module board. Note that switches 3 though 6 are reserved, and should not be changed from their default values. See "Switches and Connectors" in the system Installation and Troubleshooting Guide for the location of the DIP switch on the server module board. Table 1-2.
Microsoft Windows 2000 Advanced Server Information If you install the Microsoft Windows 2000 Advanced Server operating system using the Dell Server Assistant and reboot the system, Windows Device Manager may not initially display all installed Broadcom NIC ports. The Device Manager may also display the following error message: This device cannot find enough free resources that it can use. If this situation occurs, restart the system.
Figure 1-1. Main System Setup Program Screen Table 1-3. System Setup Program Main Screen Option Option Description Boot Sequence Retry (Disabled default) Enables or disables the Boot Sequence Retry feature. When set to Enabled, the system re-attempts the boot sequence after a 30-second timeout if the previous boot attempt failed. Memory Screen Table 1-4 lists a new option on the Memory Information screen. Table 1-4.
8 Information Update
Dell™ PowerEdge™ 1955 系统 信息更新 w w w. d e l l . c o m | s u p p o r t . d e l l .
注、注意和警告 注:注表示可以帮助您更好地使用计算机的重要信息。 注意:注意表示可能会损坏硬件或导致数据丢失,并告诉您如何避免此类问题。 警告:警告表示可能会导致财产损失、人身伤害甚至死亡。 ____________________ 本说明文件中的信息如有更改,恕不另行通知。 © 2006-2007 Dell Inc. 版权所有,翻印必究。 未经 Dell Inc. 书面许可,严禁以任何形式进行复制。 本文中使用的商标:Dell、 DELL 徽标和 PowerEdge 是 Dell Inc. 的商标; Microsoft 和 Windows 是 Microsoft Corporation 的注册商标; Intel 和 Xeon 是 Intel Corporation 的注册商标; Red Hat 是 Red Hat, Inc. 的注册商标; SUSE 是 Novell Inc. 的注册商标。 本文件中述及的其它商标和产品名称是指拥有相应商标和名称的公司或其制造的产品。 Dell Inc.
本说明文件针对您的系统提供了有关以下主题的更新信息: • 四核处理器升级 • NIC 组队限制 • 光纤信道通道模块指示灯 • 安装操作系统时的显示器连接 • NIC 活动指示灯 • 服务器模块受限 • 服务器模块板 DIP 开关设置 • 控制台重定向信息 • Microsoft® Windows® 2000 Advanced Server 操作系统信息 • 系统诊断程序 - PCI 设备列表中的 NIC 项 • NIC 的 Linux 列举 • 系统设置程序更新 四核处理器升级 如果刀片手柄的内部标有“II”,当提供了四核 Intel® Xeon® 处理器 5300 系列时,您的系统可以 升级到此处理器系列,但存在一些限制。有关您的系统的处理器可用性和升级选项的信息, 请参阅 support.dell.
光纤信道通道模块指示灯 可选光纤信道通道模块上显示的指示灯模式取决于安装在服务器模块(刀片)中的特定光纤信道子卡。 系统当前支持的卡包括 Dell 2342M、QME2462 和 Emulex LPe1105-M 卡。表 1-1 详细介绍了这些卡的状 态指示灯模式,它取代了《硬件用户手册》中的表 1-11。 表 1-1.
表 1-2.
系统诊断程序 在系统诊断程序显示的 PCI 设备列表中,系统上集成的 Broadcom NIC 端口和可选的 Broadcom 双端口 以太网子卡被标识为 Vendor 14E4 Product 16AC(厂商 14E4 产品 16AC)。这不会影响端口的功能。 NIC 的 Linux 列举 使用 udev 内核设备管理器的 Linux 操作系统版本与较早的 Linux 版本(这些 Linux 版本使用 devfs 设备管理器)相比,所列举的 NIC 可能不同。尽管这并不影响系统功能,但在使用 Red Hat® Enterprise Linux(第 4 版)或 SUSE® Linux Enterprise Server 9 操作系统时,NIC 可能会向后列 举:NIC1 可能配置为 eth1,而不是 eth0,而 NIC2 可能配置为 eth0,而不是 eth1。有关详情以及 要找到更改默认设备列举的方法,请参阅 http://linux.dell.
表 1-3. 系统设置程序主屏幕选项 选项 说明 Boot Sequence Retry (引导顺序重试) (默认设置为 Disabled [ 禁用 ]) 启用或禁用引导顺序重试功能。当设置为 Enabled(启用)时,如果上一次试 图引导时失败,系统将在 30 秒超时后重试引导顺序。 内存屏幕 表 1-3 列出了 Memory Information(内存信息)屏幕上的新选项。 表 1-4.
16 信息更新
Systèmes Dell™ PowerEdge™ 1955 Mise à jour des informations w w w. d e l l . c o m | s u p p o r t . d e l l .
Remarques, avis et précautions REMARQUE : une REMARQUE indique des informations importantes qui peuvent vous aider à mieux utiliser votre ordinateur. AVIS : un AVIS vous avertit d'un risque de dommage matériel ou de perte de données et vous indique comment éviter le problème. PRÉCAUTION : une PRÉCAUTION indique un risque potentiel d'endommagement du matériel, de blessure corporelle ou de mort. ____________________ Les informations contenues dans ce document peuvent être modifiées sans préavis.
Ce document met à jour les informations portant sur les sujets suivants : • Mise à niveau via l'installation de processeurs quadruple cœur • Contraintes liées au regroupement (“teaming”) des NIC • Voyants du module d'intercommunication Fibre Channel • Raccordement du moniteur lors de l'installation d'un système d'exploitation • Voyant d'activité du NIC • Basculement des modules serveurs dans un mode de performances réduites (“throttling”) • Réglages du commutateur DIP situé sur la carte du modu
Voyants du module d'intercommunication Fibre Channel Les codes affichés par les voyants du module d'intercommunication Fibre Channel en option varient selon la carte fille Fibre Channel installée dans le module serveur (lame). Actuellement, le système prend en charge les cartes Dell 2342M, QME2462 et Emulex LPe1105-M. Le tableau 1-1 répertorie les codes des voyants d'état affichés pour chacune de ces cartes.
Réglages du commutateur DIP situé sur la carte du module serveur Le tableau 1-2 répertorie tous les réglages du commutateur DIP qui se trouve sur la carte du module serveur. Les commutateurs 3 à 6 étant réservés, il est fortement déconseillé de modifier leur réglage par défaut.
Informations concernant Microsoft Windows 2000 Advanced Server Lorsque vous redémarrez le système après avoir installé Microsoft Windows 2000 Advanced Server à l'aide de Dell Server Assistant, il est possible que le Gestionnaire de périphériques de Windows ne répertorie pas tous les ports des NIC Broadcom installés, ou affiche le message d'erreur suivant : This device cannot find enough free resources that it can use.
Figure 1-1. Écran principal du programme de configuration du système Tableau 1-3. Option de l'écran principal du programme de configuration du système Option Description Boot Sequence Retry (Ré-exécution de la séquence d'amorçage) Disabled (Désactivé, option par défaut) Active ou désactive la fonction de ré-exécution de la séquence d'amorçage.
24 Mise à jour des informations
Dell™ PowerEdge™ 1955-Systeme Aktuelle Informationen w w w. d e l l . c o m | s u p p o r t . d e l l .
Anmerkungen, Hinweise und Warnungen ANMERKUNG: Eine ANMERKUNG macht auf wichtige Informationen aufmerksam, die die Arbeit mit dem Computer erleichtern. HINWEIS: Ein HINWEIS warnt vor möglichen Beschädigungen der Hardware oder vor Datenverlust und zeigt auf, wie derartige Probleme vermieden werden können. VORSICHT: Hiermit werden Sie auf eine potentiell gefährliche Situation hingewiesen, die zu Sachschäden, Verletzungen oder zum Tod führen könnte.
Dieses Dokument enthält aktuelle Informationen zum System.
Anzeigen des Fibre-Channel-Passthrough-Moduls Die Anzeigemuster auf dem optionalen Fibre-Channel-Passthrough-Modul sind abhängig von der spezifischen Fibre-Channel-Zusatzkarte, die im Servermodul (Blade) installiert ist. Die derzeit vom System unterstützen Karten sind die Typen Dell 2342M, QME2462 und Emulex LPe1105-M. Tabelle 1-1 enthält die Statusanzeigemuster für diese Karten und ersetzt hiermit Tabelle 1-11 im Hardware-Benutzerhandbuch. Tabelle 1-1.
DIP-Schalter der Servermodulplatine Tabelle 1-2 enthält alle DIP-Schalterstellungen auf der Servermodulplatine. Beachten Sie, dass die Schalter 3 bis 6 reserviert sind und ihre Position nicht geändert werden darf. Die Position des DIPSchalters auf der Servermodulplatine erfahren Sie unter „Schalter und Anschlüsse“ in der Installation and Troubleshooting Guide (Anleitung zur Installation und Fehlerbehebung) zum System. Tabelle 1-2.
Informationen zu Microsoft Windows 2000 Advanced Server Wenn Sie das Betriebssystem Microsoft Windows 2000 Advanced Server mit Dell Server Assistant installieren und das System neu starten, werden im Geräte-Manager von Windows zu Anfang nicht alle installierten Broadcom NIC-Ports angezeigt. Im Geräte-Manager wird möglicherweise auch die folgende Fehlermeldung angezeigt: This device cannot find enough free resources that it can use. Starten Sie in diesem Fall das System neu.
Abbildung 1-1. Hauptbildschirm des System-Setup-Programms Tabelle 1-3. Option im System-Setup-Hauptbildschirm Option Beschreibung Boot Sequence Retry (Standardeinstellung Disabled) Aktiviert oder deaktiviert die Funktion zum erneuten Durchlaufen der Startreihenfolge. Wenn diese Option auf Enabled (Aktiviert) gesetzt ist, versucht das System die Startreihenfolge nach einer 30-sekündigen Pause erneut zu durchlaufen, falls ein vorheriger Startversuch fehlgeschlagen ist.
32 Aktuelle Informationen
Dell™ PowerEdge™ 1955 システム アップデート情報 w w w. d e l l . c o m | s u p p o r t . d e l l .
メモ、注意、警告 メモ:コンピュータを使いやすくするための重要な情報を説明しています。 注意:ハードウェアの損傷やデータの損失の可能性があることを示し、その危険を回避するための方法を 説明しています。 警告:物的損害、けが、または死亡の原因となる可能性があることを示しています。 ____________________ 本書の内容は予告なく変更されることがあります。 © 2006-2007 すべての著作権は Dell Inc. にあります。 Dell Inc. の書面による許可のない複製は、いかなる形態においても厳重に禁じられています。 本書に使用されている商標: Dell、DELL ロゴ、および PowerEdge は Dell Inc. の商標です。Microsoft および Windows は Microsoft Corporation の登録商標です。Intel および Xeon は Intel Corporation の登録商標です。Red Hat は Red Hat, Inc. の登録商標です。SUSE は Novell Inc.
本書では、以下のトピックについて、お使いのシステムに関するアップデート情報を提供します。 • クアッドコアプロセッサのアップグレード • NIC のチーミングの制限 • ファイバーチャネルパススルーモジュールのインジケータ • OS インストール時のモニターの接続 • NIC アクティビティ LED • サーバーモジュールの調整 • サーバーモジュール基板の DIP スイッチの設定 • コンソールリダイレクションの情報 • Microsoft® Windows® 2000 Advanced Server OS の情報 • システム診断プログラム ― PCI デバイスリストにおける NIC エントリ • Linux による NIC の列挙 • セットアップユーティリティのアップデート クアッドコアプロセッサのアップグレード ブレードのハンドルの内側に「II」のラベルがある場合、お使いのシステムは、クアッドコア Intel® Xeon® 5300 シリーズのプロセッサが利用可能になった段階で、そのシリーズのプロセッサ にアップグレードできます。ただし、一部の制限があ
ファイバーチャネルパススルーモジュールのインジケータ オプションのファイバーチャネルパススルーモジュール上に表示されるインジケータのパターンは、 サーバーモジュール(ブレード)に取り付けられているファイバーチャネルドーターカードによっ て異なります。お使いのシステムで現在サポートされているカードは、Dell 2342M、QME2462、 および Emulex LPe1105-M です。これらのカードのステータスインジケータのパターンを 表 1-1 に示します。この表は『ハードウェアオーナーズマニュアル』の表 1-11 をアップデートしたも のです。 表 1-1 ファイバーチャネルパススルーモジュールのインジケータ インジケータ のタイプ ファイバーチャ ネルインジケータ (緑色 / 黄色) インジケータ コード Dell 2342M ドーターカード QME2462 ドーターカード Emulex LPe1105-M ドーターカード 電源オフ 消灯 / 消灯 消灯 / 消灯 消灯 / 消灯 ファイバーチャ ネルがオンライン 緑色 / 消灯 消灯 / 黄色 緑色 / 黄色の点滅 接続の
サーバーモジュール基板の DIP スイッチ 表 1-1 に、サーバーモジュール基板のサーバーモジュール DIP スイッチのスイッチ設定をすべて示 します。スイッチ 3 ~ 6 は予備です。デフォルト値を変更しないでください。サーバーモジュール 基板上の DIP スイッチの位置については、システムの『インストール & トラブルシューティング』 の「Switches and Connectors」(スイッチとコネクタ)を参照してください。 表 1-2 サーバーモジュールの DIP スイッチの設定 DIP スイッチ 設定 説明 (デフォルト) スイッチ 1 を ON に設定するとパスワード機能が有効になります。 PWRD_EN (スイッチ 1) スイッチ 1 を OFF に設定するとパスワード機能が無効になります。 (デフォルト) スイッチ 2 を OFF に設定しておくと、NVRAM の設定がシステム起 動時にクリアされません。 NVRAM_CLR (スイッチ 2) スイッチ 2 を ON に設定しておくと、NVRAM の設定が次回のシス テム起動時にクリアされます。 スイッチ 3 予備。変更
Microsoft Windows 2000 Advanced Server の情報 Dell Server Assistant を使用して Microsoft Windows 2000 Advanced Server OS をインストール し、システムを再起動すると、Windows のデバイスマネージャに最初はすべての内蔵 Broadcom NIC ポートが表示されない場合があります。また、デバイスマネージャに次のエラーメッセージが 表示される場合があります。 This device cannot find enough free resources that it can use. この場合はシステムを再起動してください。詳細については、Microsoft のサポートサイト support.microsoft.
図 1-1 セットアップユーティリティのメイン画面 表 1-3 セットアップユーティリティのメイン画面のオプション オプション Boot Sequence Retry (起動順序再試行) (デフォルトは Disabled (無効)) 説明 Boot Sequence Retry(起動順序再試行)機能の有効 / 無効を切り替えます。 Enabled(有効)に設定しておくと、前回の起動が失敗した場合、30 秒のタイ ムアウト後に、システムは起動順序を再試行します。 メモリ画面 Memory Information(メモリ情報)画面の新しいオプションを 表 1-3 に示します。 表 1-4 Memory Information(メモリ情報)画面のオプション オプション Low Power Mode (節電モード) (デフォルトは Disabled) 説明 Low Power Mode(節電モード)の有効 / 無効を切り替えます。 Enabled(有効)に設定すると、メモリは節電のために低速で動作します。 Disabled(無効)に設定すると、メモリは最大速度で動作します。 アップデート情報 39
40 アップデート情報
Dell™ PowerEdge™ 1955 시스템 설명서 갱신본 w w w. d e l l . c o m | s u p p o r t . d e l l .
참고 , 알림 , 주의 참고 : 참고는 컴퓨터를 보다 효율적으로 사용하는데 도움이 되는 중요 정보를 제공합니다 . 알림 : 알림은 하드웨어의 손상 또는 데이터 유실 위험을 설명하며 , 이러한 문제를 방지할 수 있는 방법을 알려줍니다 . 주의 : 주의는 재산상의 피해나 심각한 부상 또는 사망을 유발할 수 있는 위험이 있음을 나타냅니다 . ____________________ 본 설명서에 수록된 정보는 사전 통보 없이 변경될 수 있습니다 . © 2006-2007 Dell Inc. All rights reserved. 어떠한 경우에도 Dell Inc. 의 사전 승인 없이 무단 복제하는 행위는 엄격하게 금지되어 있습니다 . 본 설명서에 사용된 상표인 Dell, DELL 로고 및 PowerEdge 는 Dell Inc. 의 상표이며 . Microsoft 및 Windows 는 Microsoft Corporation 의 등록 상표입니다 .
본 설명서는 다음 내용에 관한 시스템의 최신 정보를 제공합니다 . • 4 중 코어 프로세서 업그레이드 • NIC 팀 제한사항 • Fibre Channel Pass-Through 모듈 표시등 • 운영 체제 설치 시 모니터 연결 • NIC 작동 LED • 서버 모듈 스로틀링 • 서버 모듈 보드 DIP 스위치 설정 • 콘솔 재지정 정보 • Microsoft® Windows® 2000 Advanced Server 운영 체제 정보 • 시스템 진단 - PCI 장치 목록의 NIC 항목 • NIC 의 Linux 표시 • 시스템 설치 프로그램 업데이트 4 중 코어 프로세서 업그레이드 블레이드 손잡이 내부의 레이블에 "II"가 있으면 약간의 제한은 있지만 시스템을 4중 코어 Intel® Xeon® Processor 5300 계열(사용 가능한 경우)로 업그레이드할 수 있습니다. 프로세서 가용성 및 시스템의 업그레이드 옵션에 대한 내용은 support.dell.com을 참조하십시오.
Fibre Channel Pass-Through 모듈 표시등 Fibre Channel pass-through 모듈 옵션에 표시되는 표시등 패턴은 서버 모듈 ( 블레이드 ) 에 장착된 특정 Fibre Channel 도터 카드에 따라 달라집니다 . 현재 시스템이 지원하는 카드에는 Dell 2342M, QME2462 및 Emulex LPe1105-M 카드 등이 있습니다 . 표 1-1 은 이러한 카드의 상태 표시등 패턴을 자세히 보여주며 하드웨어 사용 설명서의 표 1-11 과 대체됩니다 . 표 1-1.
서버 모듈 보드 DIP 스위치 표 1-1 은 서버 모듈 보드의 서버 모듈 DIP 스위치에 대한 모든 스위치 설정 목록을 보여 줍니다 . 3-6 스위치가 예약되었고 기본값에서 변경하면 안됩니다 . 서버 모듈 보드의 DIP 스위치 위치는 시스템 설치 및 문제 해결 설명서의 " 스위치 및 커넥터 " 를 참조하십시오 . 표 1-2. 서버 모듈 DIP 스위치 설정 DIP 스위치 설정 PWRD_EN ( 스위치 1) 설명 ( 기본값 ) 스위치 1 이 "on" 으로 설정되면 암호 기능이 활성화됩니다 . 스위치 1 이 "off" 로 설정되면 암호 기능이 비활성화됩니다 . NVRAM_CLR ( 스위치 2) ( 기본값 ) 스위치 2 가 "off" 로 설정되면 NVRAM 의 구성 설정은 시스 템을 부팅해도 유지됩니다 . 스위치 2 가 "on" 으로 설정되면 NVRAM 의 구성 설정은 다 음에 시스템을 부팅하면 지워집니다 . 스위치 3 예약됨 . 변경하지 마십시오 . 스위치 4 예약됨 .
Microsoft Windows 2000 Advanced Server 정보 Dell Server Assistant 를 사용하여 Microsoft Windows 2000 Advanced Server 운영 체제를 설치하고 시 스템을 재부팅하면 Windows 장치 관리자가 설치된 Broadcom NIC 포트를 모두 처음에 표시하지 않 을 수 있습니다 . 장치 관리자가 다음 오류 메시지를 표시할 수도 있습니다 . This device cannot find enough free resources that it can use. 이러한 상황이 발생할 경우 시스템을 다시 시작하십시오 . 자세한 내용은 support.microsoft.com 의 Microsoft 기술 자료 문서 KB918417 을 참조하십시오 .
그림 1-1. 시스템 설치 프로그램 기본 화면 표 1-3. 시스템 설치 프로그램 기본 화면 옵션 옵션 설명 부팅 순서 재시도 (기본값: Disabled) 부팅 순서 재시도 기능을 활성화 또는 비활성화합니다. Enabled로 설정되어 있으면 이전 부팅 시도가 실패한 경우 30초의 타임아웃 후 부팅 순서를 다시 시도합니다. 메모리 화면 표 1-3에는 Memory Information 화면의 새 옵션이 나열됩니다.. 표 1-4. 메모리 정보 화면 옵션 옵션 설명 Low Power Mode (기본값: Disabled) Low Power Mode를 활성화 또는 비활성화합니다. Enabled로 설정되어 있으면 메 모리가 느리게 실행되어 전원을 절약합니다. Disabled는 메모리가 전체 속도로 실 행되도록 해줍니다..
48 설명서 갱신본
Sistemas Dell™ PowerEdge™ 1955 Actualización de información w w w. d e l l . c o m | s u p p o r t . d e l l .
Notas, avisos y precauciones NOTA: una NOTA proporciona información importante que le ayudará a utilizar mejor el ordenador. AVISO: un AVISO indica la posibilidad de daños en el hardware o la pérdida de datos, e informa de cómo evitar el problema. PRECAUCIÓN: un mensaje de PRECAUCIÓN indica el riesgo de daños materiales, lesiones o incluso la muerte. ____________________ La información contenida en este documento puede modificarse sin previo aviso. © 2006-2007 Dell Inc. Reservados todos los derechos.
En este documento se proporciona información actualizada sobre los temas siguientes relativos al sistema: • Actualizaciones al procesador de cuatro núcleos • Restricciones de la agrupación de NIC • Indicadores de módulo de paso a través Fibre Channel • Supervisión de conexiones al instalar un sistema operativo • LED de actividad de la NIC • Regulación de los módulos de servidor • Configuración del conmutador DIP de la placa del módulo de servidor • Información sobre la redirección de consola
Indicadores de módulo de paso a través Fibre Channel Los patrones de los indicadores visualizados en el módulo de paso a través Fibre Channel opcional dependen de la tarjeta secundaria Fibre Channel específica instalada en el módulo de servidor (módulo de alta densidad). Las tarjetas compatibles con su sistema son las tarjetas Dell 2342M, QME2462 y Emulex LPe1105-M.
Conmutador DIP de la placa del módulo de servidor En la tabla 1-1 se enumeran todas las configuraciones del conmutador DIP del módulo de servidor situado en la placa del módulo de servidor. Tenga en cuenta que los conmutadores del 3 al 6 están reservados y no deben cambiarse los valores predeterminados correspondientes.
Información sobre Microsoft Windows 2000 Advanced Server Si instala el sistema operativo Microsoft Windows 2000 Advanced Server mediante Dell Server Assistant y reinicia el sistema, es posible que el Administrador de dispositivos de Windows no muestre inicialmente todos los puertos NIC Broadcom instalados. Asimismo, es posible que el Administrador de dispositivos muestre el mensaje de error siguiente: Este dispositivo no encuentra suficientes recursos libres que pueda usar. En ese caso, reinicie el sistema.
Figura 1-1. Pantalla principal del programa de configuración del sistema Tabla 1-3. Opción de la pantalla principal del programa de configuración del sistema Opción Descripción Boot Sequence Retry (valor predeterminado: Disabled) Activa o desactiva la función Boot Sequence Retry (Reintento de la secuencia de inicio). Cuando esta opción está activada (Enabled), el sistema reintenta la secuencia de inicio tras un tiempo de espera de 30 segundos si el intento de inicio anterior ha fallado.
56 Actualización de información