User Manual

3 Note the loeation of the SCSI eontroller eard in the system, and remove the elamping
bar from the right side of the opening in the braeket behind the eontroller eard.
To remove the elamping bar, loosen the Phillips-head serew attaehing the elamping bar
to the braeket (see Figure 1-1).
4 Conneet the SCSI interfaee eable(s) to the host adapter eard, and seeure the eable(s)
using the two thumbserews on the eable eonneetor(s).
5 Use the serew you removed in step ) to reattaeh the elamping bar to the braeket.
Information in this document is subject to change without notice.
© 2002 Dell Computer Corporation. All rights reserved. Printed in Brazil.
Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly
forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Computer Corporation. Other trademarks
and trade names may be used in this document to refer to either the entities claiming the marks and names or their
products. Dell Computer Corporation disclaims any proprietary interest in trademarks and trade names other than its own.