Service Manual

Back to Contents Page
System Overview: Dell™ PowerEdge™ 350 Systems Service
Manual
Overview Service Features
System Features Technical Specifications
Overview
The Dell PowerEdge 350 system uses an Intel® Celeron® or Pentium® III microprocessor and next-generation
chip set and memory technology to provide high performance in Internet server and Web hosting application
environments.
This section describes the hardware features that simplify servicing of the system. It also describes major
hardware and software features of the system.
NOTE: The PowerEdge 350 system is a "headless" system that operates without keyboard, monitor,
or mouse. While it is possible to connect these peripherals to the system, it is generally not
necessary unless troubleshooting the system.
System Features
The system offers the following major features:
One Celeron microprocessor with an internal operating frequency of at least 600 megahertz (MHz) or
one Pentium III microprocessor with an internal operating frequency of 750 MHz.
A secondary level 2 (L2) cache of 128 kilobytes (KB) (Celeron) or 256 KB (Pentium III) SRAM is
included within the microprocessor. Math coprocessor functions are provided by the microprocessor. A
separate and external math coprocessor chip set is not used or required.
Front-side bus with an external bus speed of 66 MHz (Celeron) or 100 MHz (Pentium III).
A minimum of 128 megabytes (MB) of system memory, upgradable to a maximum of 1 GB by installing
combinations of 128, or 256 MB unbuffered, registered synchronous dynamic random-access memory
(SDRAM) (dual inline memory modules) DIMMs in the four DIMM sockets on the system board.
A flash basic input/output system (BIOS) that can be upgraded if required.
One or two 1-inch integrated drive enhanced (IDE) 10, 20, or 40 gigabyte (GB) hard-disk drives.
Slimline 1.44 MB 3.5-inch diskette drive.
Slimline CD-ROM drive.