Service Manual

Removing and Replacing Parts 4-3
Computer Cover
Figure 4-1. Computer Cover Removal
To remove the computer cover, follow these steps:
1. Turn the keylock on the back edge of the cover clockwise to the
unlocked position (see Figure 4-1).
2. Slide the cover a half-inch (about a centimeter) or so toward the
back of the computer.
3. Grasping the top of the cover at both ends, lift it away from the
chassis.
To replace the cover, make sure the keylock is in the unlocked position. Fit the
cover over the side rail at the bottom of the chassis and slide it closed.
computer cover
keylock