Service Manual

4-4 Dell PowerEdge 6300 Systems Service Manual
Front Bezel
Figure 4-2. Front Bezel Removal
To remove the front bezel, follow these steps:
1. Remove the computer cover.
2. Gently pry the four tabs along the right edge of the bezel loose,
and then disengage the three hooks on the opposite edge from
the chassis (see Figure 4-2).
3. Rotate the bezel to the left to disengage it.
To replace the bezel, align the three hooks on the edge of the bezel and press
the bezel into place until the tabs on the opposite edge of the bezel snap into
place.
hooks (3)
tabs (4)
front bezel