Service Manual

4-26 Dell PowerEdge 6300 Systems Service Manual
DIMMs
Figure 4-21. DIMM Removal
To remove a DIMM, follow these steps:
1. Remove the interior support panel.
2. Remove the memory module by grasping it by the corners and
pulling it from its connector.
3. Press outward on the socket’s securing clips until the DIMM pops
free of the socket (see Figure 4-21).
Figure 4-22. DIMM Installation
To replace a DIMM, press outward on the securing clips until they snap open
(step 1 in Figure 4-22). Align the notches in the DIMM to the crossbars in the
socket, and press down on the outer edges of the DIMM while pulling up on
the securing clips until the clips lock around the ends of the DIMM (step 2 in
Figure 4-22).
securing clips
notches
1.
2.
securing clips