Service Manual

1-6 Dell PowerEdge 6300 Systems Service Manual
Accessing the Interior of the System
To access the SCSI backplane board or the PSPB, release the system-board
tray latch at the back lower corner of the tray (see Figure 1-5) and pull the tray
open to the first stop position, or service position).
NOTE: From the service position, if you depress and release the tray latch and
pull the tray out again, you will come to a second stop position that is used by
manufacturing. To remove the tray completely from any position, depress the
latch, hold it in, and pull the tray out of the chassis.
Figure 1-5. Opening the System Board Tray
system
board tray
SCSI backplane
board
tray
latch