Manualshelf

Users Guide

ManualsBrandsDell ManualsFax MachinePOWEREDGE 6300
41424344454647484950
Installing and Configuring SCSI Drivers 3-19
NOTE: Specific help text for each driver appears in the middle of the screen as
you scroll down the list. The Loaded Drivers window below the list of available
drivers displays the names of drivers that are loaded and operational. For a new
installation, this list is initially empty. For a selective installation, the list shows
the drivers already running.
The system prompts you for a slot number for the device.
13. Press <Alt><Esc> to switch to the console prompt, type load
a:\aic78u2.ham, and press <Enter>.
A list of slot numbers is displayed separated by commas. Write down all slot
numbers that are listed and press <Esc> to clear the command line. Press
<Alt><Esc> to return to the installation screen.
14. Enter the slot number for the driver and press <Enter>.
15. Press <Enter> to save the parameters and continue.
16. When prompted to select an additional disk driver, select Yes.
17. Repeat steps 12 through 16 for the aha2940.ham driver.
18. When prompted to select an additional disk driver, select No.
You now need to install the appropriate network adapter driver.
19. From the Driver Actions menu, select the Select/Edit Disk or LAN
Drivers option and press <Enter>.
The Network (LAN) Driver name box is highlighted.
20. Press <Enter> again to go to a local area network (LAN) driver selec-
tion screen.
21. Press <Insert> and then press <F3>.
22. Verify that the driver diskette is in the diskette drive and press
<Enter>.
A screen appears listing the available LAN drivers.
23. Note the name of the driver you need to install and then press <Alt>
<Esc> to switch to the console prompt.
24. At the console prompt, type load a:\driver_filename and press <Enter>.
A list of slot numbers is displayed separated by commas. Write down all slot
numbers that are listed and press <Esc> to clear the command line. Press <Alt>
<Esc> to return to the installation screen.
25. Highlight the driver from the LAN driver selection screen and press
<Enter>.
A LAN driver configuration screen appears.