User Manual
If no error messages occur during POST, continue to the next step.
If there are error messages, the system board might be faulty. See "Getting Help."
10. Open the system. See "Opening the System."
11. Remove the memory module from DIMM A and reinstall one of the memory modules that you removed in step7.
12. Close the system. See "Closing the System."
If no error messages occur during POST, reinstall one of the memory modules that you removed in step7 and repeat this step for the remaining memory
module.
If there are error messages, the memory module is faulty. Replace the memory module. See "System Memory."
13. Run the system memory test in the system diagnostics. See "Running the System Diagnostics."
If the test does not complete successfully, see "Getting Help."
Troubleshooting the System Board
Problem
l Error message indicates a system board problem.
Action
1. Open the system. See "Opening the System."
2. Remove the expansion cards, if installed. See "Removing an Expansion Card" in "Installing System Components."
3. Close the system. See "Closing the System."
4. Run the system board tests in the system diagnostics. See "Running the System Diagnostics."
If the tests do not run successfully, see "Getting Help."
5. Open the system. See "Opening the System."
6. Reinstall the one of the expansion cards that you removed in step2. See "Installing an Expansion Card" in "Installing System Components."
7. Close the system. See "Closing the System."
8. Run the system board tests again.
If the tests do not complete successfully, the expansion card might be faulty. See "Getting Help."
If the tests complete successfully, repeat step5 through step8 for the remaining expansion card, if applicable.
Troubleshooting a Diskette Drive
Problem
l Error message indicates a diskette drive problem.
Action