Users Guide
Table Of Contents
- SAS Information Update
- SAS 信息更新
- Mise à jour des informations sur les configurations SAS
- Aktuelle Informationen zu SAS
- SAS のアップデート情報
- SAS 정보 업데이트
- Actualización de información sobre SAS
20 SAS Information Update
Figure 1-12. Removing and Installing the Peripheral Interposer Board
Installing a Peripheral Interposer Board
1
Connect the backplane power cable to the front of the interposer board. See Figure 1-11.
2
Install the peripheral interposer board:
a
Carefully lower the interposer board into the system, being careful to avoid damaging components
on the face of the board. See Figure 1-12.
b
Align the installation alignment slot on the bottom of the interposer board with the alignment pin
on the bottom of the chassis.
c
Slide the retention slots on the interposer board over the retention hooks on the chassis.
d
Slide the board downward until the blue retention tab snaps into place.
1 retention tab 2 installation alignment slot 3 peripheral interposer board
3
1
2