Users Guide
Table Of Contents
- SAS Information Update
- SAS 信息更新
- Mise à jour des informations sur les configurations SAS
- Aktuelle Informationen zu SAS
- SAS のアップデート情報
- SAS 정보 업데이트
- Actualización de información sobre SAS
16 SAS Information Update
7
Remove the SAS backplane:
a
Press the spring-loaded blue retention tab at the back of the backplane, then slide the backplane
upward. See Figure 1-9.
b
When the backplane cannot slide upward any farther, pull the backplane toward the back
of the system to remove it from the retention hooks.
c
Lift the board out of the system, being careful to avoid damaging components on the face
of the board.
d
Place the SAS backplane face down on a work surface.
Figure 1-9. Removing and Installing a 2.5-Inch SAS Backplane
1 2.5-inch backplane 2 retention tab
2
1