Users Guide


Table A-1.SystemBoardJumperSettings

System Board Connectors

See FigureA-3 and TableA-2 for the location and description of system board connectors. FigureA-3 also lists expansion slot numbers, buses, and bus
operating speeds.
Figure A-3. System Board Connectors

Jumper
Setting
Description
PSWD_EN
 (default)
The password feature is enabled.

The password feature is disabled.
NVRAM_CLR
 (default)
The configuration settings are retained at system startup.

The configuration settings are cleared at next system startup.
NOTE: You can store a spare, unused jumper plug on one pin of the NVRAM_CLR jumper block.
 jumpered unjumpered