Setup Guide

Using the Baseboard Management Controller 25
IPMI 1.5 / 2.0 Command Support List
Table 1-29 shows the IPMI commands.
Table 1-28. iBMC User Information
Information Description
User ID Displays a sequential user ID number.
State Displays the login state of the user. Enabled or Disabled (Default).
User Name Displays the login name of the user.
iBMC Privilege Displays the group (privilege level) to which the user is assigned
(Administrator, Operator, User, Custom, or None).
IPMI LAN Privilege Displays the IPMI LAN privilege level to which the user is assigned
(Administrator, Operator, User, or None).
Serial Over LAN Allow/Disallow the user to use IPMI Serial over LAN.
Table 1-29. IPMI Device Global Commands
Commands NetFn CMD O/M Supported
Get Device ID App 01h M Yes
Cold Reset App 02h O Yes
Warm Reset App 03h O No
Get Self Test Results App 04h M Yes
Manufacture Test On App 05h O Yes
Set ACPI Power State App 06h O Yes
Get ACPI Power State App 07h O Yes
Get Device GUID App 08h O Yes
Broadcast Commands:
Broadcast ‘Get Device ID’ App 01h M Yes