Setup Guide

30 Using the Baseboard Management Controller
www.dell.com | support.dell.com
Table 1-36 shows the FRU inventory device commands.
Table 1-37 shows the sensory device commands.
Enter SDR Repository Update
Mode
Storage 2Ah O No
Exit SDR Repository Update
Mode
Storage 2Bh O No
Run Initialization Agent Storage 2Ch O Yes
Table 1-36. FRU Inventory Device Commands
Commands NetFn CMD O/M Supported
Get FRU Inventory Area Info Storage 10h M Yes
Read FRU Inventory Data Storage 11h M Yes
Write FRU Inventory Data Storage 12h M Yes
Table 1-37. Sensory Device Commands
Commands NetFn CMD O/M Supported
Get Device SDR Info S/E 20h O No
Get Device SDR S/E 21h O No
Reserve Device SDR Repository S/E 22h O No
Get Sensor Reading Factors S/E 23h O Yes
Set Sensor Hysteresis S/E 24h O Yes
Get Sensor Hysteresis S/E 25h O Yes
Set Sensor Threshold S/E 26h O Yes
Get Sensor Threshold S/E 27h O Yes
Set Sensor Event Enable S/E 28h O Yes
Get Sensor Event Enable S/E 29h O Yes
Re-arm Sensor Events S/E 2Ah O Yes
Get Sensor Event Status S/E 2Bh O Yes
Get Sensor Reading S/E 2Ch M Yes
Set Sensor Type S/E 2Dh O No
Table 1-35. SDR Repository Commands
Commands NetFn CMD O/M Supported