Setup Guide

ManualsBrandsDell ManualsServerPowerEdge C1100

Using the Baseboard Management Controller 31

Table 1-38 shows the LAN commands.

Table 1-39 shows the PEF/PET alerting commands.

Get Sensor Type S/E 2Eh O No

Set Sensor Reading and Event

Status

S/E 2Fh M Yes

Table 1-38. LAN Commands

Commands NetFn CMD O/M Supported

Set LAN Configuration

Parameters (Note: Parameter 9

and 25 are not supported.

Transport 01h M Yes

Get LAN Configuration

Parameters (Note: Parameter 9

and 25 are not supported.

Transport 02h M Yes

Suspend BMC ARP Transport 03h O No

Get IP/UDP/RMCP Statistics Transport 04h O No

Table 1-39. PEF/PET Alerting Commands

Commands NetFn CMD O/M Supported

Get PEF Capabilities S/E 10h M Yes

Arm PEF Postpone Timer S/E 11h M Yes

Set PEF Configuration

Parameters

S/E 12h M Yes

Get PEF Configuration

Parameters

S/E 13h M Yes

Set Last Processed Event ID S/E 14h M Yes

Get Last Processed Event ID S/E 15h M Yes

Alert Immediate S/E 16h M Yes

PET Acknowledge S/E 17h M Yes

Table 1-37. Sensory Device Commands

Commands NetFn CMD O/M Supported