Setup Guide

Using the Baseboard Management Controller 7
Component Information
Server Board Information
Including Serial Number, BIOS Version, Product ID, Manufacturer and Manufacture Date.
CPU Information
Including CPU ID, Status, Socket, Manufacturer, Model and Frequency.
Memory Information
Including Memory ID, Status, Socket, Module Size, Model and Frequency.
Power Management
This feature enables the administrator to power on or power down the system remotely.
Select a
Power Control Operation .
Click
Apply to enable the selected Power Control Operation .
System Event Log
The System Event Log (SEL) page displays system events that occur on the managed system. The
SEL is generated by the Baseboard Management Controller (iBMC) or BIOS on the managed
system.
Table 1-3. Power Status
Power Status Description
Power Status Yes or No
Table 1-4. Power Control Operation Options
Power Control Operation Description
Power On System Powers on the system.
Power Off System Powers off the system.
Reset System Reboots system without powering off (warm boot).
Power Cycle
System
Powers off, then reboots system (cold boot).
NMI Sends Non-Masking Interrupt to halt system operation.
Soft Shutdown Shuts down system.