CLI Guide
• To list the usage statistics of a specific sensor
racadm systemperfstatistics iDRAC.Embedded.1#SystemBoardCPUUsageStat
Minimum Readings
Last Hour = 0% [At Mon, 05 May 2014 17:13:04]
Last Day = 0% [At Mon, 05 May 2014 15:59:53]
Last Week = 0% [At Mon, 05 May 2014 15:59:53]
Maximum Readings
Last Hour = 0% [At Thu, 01 Jan 1970 00:00:00]
Last Day = 0% [At Thu, 01 Jan 1970 00:00:00]
Last Week = 0% [At Thu, 01 Jan 1970 00:00:00]
Average Readings
Last Hour = 0%
Last Day = 0%
Last Week = 0%
Peak Readings
Last Week 0% [At Mon, 05 May 2014 15:58:35]
• To reset the peak utilization of a specific sensor
racadm systemperfstatistics PeakReset iDRAC.Embedded.1#SystemBoardCPUUsageStat
RAC1163: The peak utilization value of Out-Of-Band performance monitoring sensor CPU Usage
is successfully reset.
techsupreport
Table 99. Details of techsupreport
Description Allows you to perform the technical support report operations. The type of operations are:
• collect — Collects the technical support report data to export. You can specify the various types of logs to
be included in the report.
This operation generates a Job ID. Use this Job ID to check the status of the collect operation. To run this
operation, you must have the Server Control Commands permission.
•
export — Exports the collected Tech Support Report data. To run this subcommand, you must have the
Execute Server Control Commands permission.
• getupdatetime — Gets the timestamp of the last operating system application data collection.
• updateosapp — Updates the operating system application data collection. To run this subcommand, you
must have the Execute Server Control Commands permission.
Synopsis
• To perform the technical support report operation by specifying the type of operation.
racadm techsupreport <tech support report command type>
• To collect the report data.
racadm techsupreport collect [-t <type of logs>]
• To export the collected report data.
racadm techsupreport export -l <CIFS or NFS share> -u <username> -p
<password>
• To get the timestamp of the last operating system application data collection.
racadm techsupreport getupdatetime
• To update the operating system application data collection.
racadm techsupreport updateosapp -t <type of OS App logs>
RACADM Subcommand Details 143