Owners Manual

System covers
The system cover protects the innards of the server and helps in maintaining air flow inside the server. Removing the system cover
actuates the intrusion switch and aids in maintaining system security.
Related tasks
Removing the system top cover (front)
Installing the system top cover (front)
Removing the system top cover (back)
Installing the system top cover (back)
Removing the system top cover (front)
Prerequisites
CAUTION: Do not operate the system without the system cover. This can result in overheating and cause component
damage.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Turn off the system, including any attached peripherals.
3. Disconnect the system from the electrical outlet and disconnect the peripherals.
Steps
1. Turn the system cover lock to the unlocked position.
2. Press the release tabs on the system top cover, and slide the cover toward the front of the system.
3. Hold the cover on both sides, and lift the cover away from the system.
Figure 8. Removing the system top cover (front)
a. system top cover (front)
b. release tab (2)
c. system cover lock
Related tasks
Installing the system top cover (front)
54
Installing and removing system components