Reference Guide

iDRAC Type (Read Only)
Description
Identies the remote access controller type.
Legal Values
Product ID
Default • For 10G iDRAC: 8
• For 11G iDRAC6 on Rack and Tower Servers: 10
• For 11G iDRAC6 Enterprise on Blade Servers: 11
• For 12G iDRAC on Rack and Tower Servers: 16
• For 12G iDRAC Enterprise on Blade Servers: 17
Example
racadm getconfig -g idRacInfo
# idRacType=8
# idRacProductInfo=Chassis Management Controller
# idRacDescriptionInfo=This system component provides a complete
set of remote management functions for blade servers
# idRacVersionInfo=P21
# idRacBuildInfo=200708301525
# idRacName=CMC-1
racadm getconfig -g idRacInfo
# idRacType=16
# idRacProductInfo=Integrated Dell Remote Access Controller
# idRacDescriptionInfo=This system component provides a complete set of remote management
functions for Dell PowerEdge Servers
# idRacVersionInfo=1.06.06
# idRacBuildInfo=15
# idRacName=idrac-GSRS3V1
cfgStaticLanNetworking
This group contains parameters to congure the device NIC for IPv4.
NOTE: A few objects in this group may require the device NIC to be reset, that may cause a brief loss in connectivity.
cfgNicStaticEnable (Read or Write)
Description
Enables or disables the NIC.
Legal Values
• 0 — Disabled
• 1 — Enabled
Default
1 — Enabled
NOTE: If this object is modied, then the object cfgNicEnable is also modied.
cfgNicStaticIPv4Enable (Read or Write)
Description
Enables or disables the IPv4 stack.
Legal Values
• 0 — Disabled
105