Reference Guide
• For iDRAC Enterprise on Blade Servers: 1800
cfgSerial
This group contains conguration parameters for the serial conguration. One instance of the group is allowed.
Use this object with the cong or getcong subcommands.
The following sections provide information about the objects in the cfgSerial group.
NOTE: The cfgSerial object group is applicable for iDRAC Enterprise on Blade Servers for only two properties —
cfgSerialTelnetEnable=1 and cfgSerialSshEnable=1.
cfgSerialBaudRate (Read or Write)
Description
Sets the baud rate on the serial port.
Legal Values
9600, 19200, 57600, 115200
Default
57600
cfgSerialConsoleEnable (Read or Write)
Description
Enables or disables the serial console interface.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgSerialConsoleQuitKey (Read or Write)
Description
This key or key combination terminates Virtual Console text for iDRAC when using the console com2
command.
Legal value: ^ follows any alphabet (a-z, A-Z) ^ follows the listed special characters: [ ] \ ^ _
NOTE: The CTRL key is represented by using the ^ (carat) character.
NOTE: The CTRL key does not generate a character by itself, but must be struck simultaneously with
another key to generate a character.
For example, striking both the CTRL key and the \ key simultaneously (rather than sequentially) is denoted as ^
\.
Conguration options: The value must start with the ^ character, and must follow one of the characters — a-z,
A-Z, [,], \
In the input command, use \ without the quotes. For example:
config -g cfgSerial -o cfgSerialConsoleQuitKey "SHIFT+6"\\
Default: <Ctrl> \
116