Reference Guide

cfgVirMediaFloppyEmulation (Read or Write)
Description
When set to 0, the virtual oppy drive is recognized as a removable disk by Windows operating systems.
Windows operating systems assigns a drive letter that is C: or higher during enumeration. When set to1, the
Virtual Floppy drive is seen as a oppy drive by Windows operating systems. Windows operating systems
assigns a drive letter of
A: or B:.
NOTE: Virtual Media has to be reattached (using cfgVirMediaAttached) for this change to take
eect.
Legal Values
• 1 (TRUE)
• 0(FALSE)
Default
0
cfgSDWriteProtect (Read Only)
Description
Displays if the physical write protect latch on the SD card is enabled or disabled.
NOTE: This command is deprecated from 12G iDRAC 1.0 release onwards. The functionality of this
command is covered by cfgVFlashSDWriteProtect. While execution of the cfgSDWriteProtect
command is successful, use the cfgVFlashSDWriteProtect command. For more information, see
cfgVFlashSDWriteProtect Read Only.
Legal Values
• 1 (TRUE)
• 0(FALSE)
Default
0
cfgServerInfo
This group allows you to select the BIOS rst boot device and provides the option to start the selected device only once.
Use this object with the cong or getcong subcommands.
The following sections provide information about the objects in the cfgServerInfo.
cfgServerName (Read Or Write)
Description
Displays the name of the specied server.
Legal Values
Maximum of 15 non-extended (ASCII characters (ASCII codes 32 through 126). For more information, see
Guidelines to Quote Strings Containing Special Characters.
Default
SLOT — <slot number>
cfgServerNic3MacAddress (Read Only)
Description
Displays the MAC address of the server NIC 3.
Legal Values
None
Default
None
125