Reference Guide

cfgServerPowerSupplyType
Description
Displays whether the power supply is AC or DC.
Legal Values
A string of up to 32 characters.
Default
0
cfgIPv6LanNetworking
This group is used to congure the IPv6 over LAN networking capabilities.
Use this object with the cong or getcong subcommands.
NOTE: To apply this setting, use the -m option.
The following sections provide information about the objects in the cfgIPv6LanNetworking group.
cfgIPv6Enable (Read or Write)
Description
Enables or disables iDRAC IPv6 stack.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgIPv6Address1 (Read or Write)
Description
Species iDRAC IPv6 address.
Legal Values
String representing a valid IPv6 entry.
Default
:
cfgIPv6Gateway (Read or Write)
Description
iDRAC gateway IPv6 address.
Legal Values
Species string representing a valid IPv6 entry.
Default
“ :: “
cfgIPv6AutoCong (Read or Write)
Description
Enables or disables the IPv6 Auto Conguration option.
NOTE: If this value is set to 0, the iDRAC disables auto conguration and statically assigns IPv6
addresses. If this value is set to 1, the iDRAC obtains address and route information using stateless
auto configuration and DHCPv6.
150