Reference Guide

cfgSmartCardLogonEnable (Read or Write)
Description
To iDRAC using a smart card, enable or disable with Remote RACADM support for access.
NOTE: Enabling with remote RACADM is only applicable for iDRAC on Rack and Tower Servers.
Legal Values
• 0 (Disabled)
• 1 (Enabled)
• 2 (Enabled with Remote RACADM) — It is not applicable for iDRAC Enterprise on Blade Servers.
Default
0
cfgSmartCardCRLEnable (Read or Write)
Description
Enables or disables the Certicate Revocation List (CRL).
This object is applicable only for iDRAC on Rack and Tower Servers and not for iDRAC Enterprise on Blade
Servers.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgNetTuning
This group enables users to congure the advanced network interface parameters for the RAC NIC. When congured, the updated
settings may take up to a minute to become active.
NOTE: This group is applicable only for iDRAC on Rack and Tower Servers and not for iDRAC Enterprise on Blade
Servers.
CAUTION: Use extra precaution when modifying properties in this group. Inappropriate modication of the properties in
this group can result in your RAC NIC become inoperable.
The following sections provide information about the objects in the cfgNetTuning group.
cfgNetTuningNicAutoneg (Read or Write)
Description
Enables auto negotiation of physical link speed and duplex. If enabled, auto negotiation takes priority over other
values set in this group.
Legal Values
• 0 = Auto Negotiation is Disabled
• 1 = Auto Negotiation is Enabled
Default
1
Example
racadm getconfig -g cfgNetTuning
cfgNetTuningNicSpeed=100
cfgNetTuningNicFullDuplex=1
cfgNetTuningNicMtu=1500
cfgNetTuningNicAutoneg=1
159