Reference Guide
NOTE: An empty string may be specied as either ” “(using double quotation marks) or ' '(using single quotation marks).
help and help subcommand
Table 3. help and help subcommand
Description
Lists all the subcommands available for use with RACADM and provides a short description about each
subcommand. You may also type a subcommand, group, object or Fully Qualied Descriptor (FQDD) name after
help.
Synopsis
• racadm help
• racadm help <subcommand>
Input
• <subcommand> — species the subcommand for which you need the help information.
• <device name> — species the device name such as iDRAC, BIOS, NIC, LifecycleController, FC,
system, or Storage.
• <group> — species the group name supported by the corresponding device.
• <object> — species the object for the entered group.
Output
• The help command displays a complete list of subcommands.
• The racadm help <subcommand> command displays information for the specied subcommand only.
• The racadm help <device name> <Group> command displays information for the specied group.
• The racadm help <device name> <Group> <Object> command displays information for the
specied object.
arp
Description
Displays the contents of the Address Resolution Protocol (ARP) table. ARP table entries cannot be added or
deleted.
To use this subcommand, you must have Debug privilege.
Synopsis
racadm arp
Input N/A
Example
racadm arp
Output
Address
HW Type HW Address Mask Device
192.168.1.1 Ether 00:0d:65:f3:7c:bf C eth0
autoupdatescheduler
Description
You can automatically update the rmware of the devices on the server.
To run this subcommand, you must have the Server Control privilege.
19