Reference Guide

BIOS.SysSecurity.SHA256SetupPassword (Read or Write)
Description Indicates the SHA256 hash of the setup password.
Legal Values String of 64 characters
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency None
BIOS.SysSecurity.SHA256SetupPasswordSalt (Read or Write)
Description Indicates the Salt string added to the setup password before hash.
Legal Values String of 32 characters
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency None
BIOS.SysSecurity.SignedFirmwareUpdate (Read or Write)
Description
Enables the signed BIOS update feature. Once enabled, this attribute cannot be disabled. When you change
the value from disabled to enabled, a warning message is displayed.
Legal Values
• Enabled
• Disabled
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency None
BIOS.SysSecurity.SysPassword (Read or Write)
Description
Provides the system password. Optional parameter –o <string> is used with this object to provide old
password as an authentication for changing the previously congured password to the new password.
The password can include the following:
• Up to 32 characters including whitespace.
• Contain numbers 0 through 9.
• Only lower case alphabets are accepted.
• Special characters accepted are +, ", ,, -, ., /, ;, [, \, ], `.
To enable password modication, J_EN_PASSWD must be installed.
To clear the already congured password, use the option available under F2 (system setup) during system start.
Legal Values
String of up to 22 characters
Default Value Not Applicable
347