Reference Guide

Example

racadm getled

LED State : Blinking

racadm getled

LED State : Not-Blinking

getniccfg

Description

Displays the current and static NIC settings for iDRAC.

Synopsis

racadm getniccfg [-m <module>]

Input

Output

The getniccfg subcommand displays an appropriate error message if the operation is not successful.

Otherwise, the output is displayed in the following format:

IPv4 settings:

NIC Enabled =1

IPv4 Enabled =1

DHCP Enabled =1

IP Address =10.94.225.165

Subnet Mask =255.255.255.128

Gateway =10.94.225.129

IPv6 settings:

IPv6 Enabled =1

DHCP6 Enabled =0

IP Address 1 =2000:de11:bcd1:fc14:1234:5678:2468:abcd

Gateway =::

Link Local Address =fe80::f21f:afff:fed0:82d6/64

IP Address 2 =::

IP Address 3 =::

IP Address 4 =::

IP Address 5 =::

IP Address 6 =::

IP Address 7 =::

IP Address 8 =::

IP Address 9 =::

IP Address 10 =::

IP Address 11 =::

IP Address 12 =::

IP Address 13 =::

IP Address 14 =::

IP Address 15 =::

LOM Status:

NIC Selection =dedicated