Reference Guide
Link Detected =Yes
Speed =1Gb/s
Duplex Mode =Full Duplex
Active NIC =Dedicated
Static IPv4 settings:
Static IP Address =192.168.0.120
Static Subnet Mask =255.255.255.0
Static Gateway =192.168.0.1
Static IPv6 settings:
Static IP Address 1 =2000:de11:bcd1:fc14:1234:5678:2468:abcd/64
Static Prefix Length =64
Static Gateway =::
NOTE: IPv6 information is displayed only if IPv6 is enabled in iDRAC.
NOTE: IPv6 Address 1 eld indicates static IP and IPv6 Address 2 eld indicates dynamic IP.
NOTE: LOM Status is displayed only for iDRAC on Rack and Tower servers and is not displayed for
iDRAC Enterprise on Blade servers.
Example
• Display iDRAC network settings in server slot 1
racadm getniccfg -m server-1
getraclog
Description
The getraclog command displays RAC log entries.
Synopsis
• racadm getraclog [-i]
• racadm getraclog [-s <start>] [-c <count>] [--more]
racadm getraclog [-c <count>] [-s <start-record>] [--more]
NOTE: If options are not provided, the entire log is displayed.
Input
• -c — Species the number of records to display.
NOTE: On Local RACADM, the number of logs are restricted to 100 by default.
• --more — Displays one screen at a time and prompts you to continue (similar to the UNIX more
command).
• -s — Species the starting record used for the display.
NOTE: When Enhanced Chassis Logging and Events feature is enabled, then -i and --more options
are not displayed.
Output
SeqNumber = 286
Message ID = USR0005
Category = Audit
AgentID = RACLOG
Severity = Information
Timestamp = 2012-10-05 06:25:27
Message = Login failed from processdisco06a: 192.168.0
Message Arg 1 = processdisco06a
36