Reference Guide

• -m <module> — Must be one of the following values:

– server-<n> : where n = 1–16

– server-<nx> : where n = 1–8; x = a, b, c, d (lower case)

• --more — Displays one screen at a time and prompts the user to continue (similar to the UNIX more

command.)

Example

• Display entire log.

racadm getsel

• Display number of records in log.

racadm getsel -i

getsensorinfo

Description Displays the status for system sensors.

NOTE: For Dell PowerEdge FX2 chassis with FM120x4 server, the power related information is

not displayed.

NOTE: General purpose graphical processing unit (GPGPU) status is displayed only on

PowerEdge C4130 servers.

Synopsis

• racadm getsensorinfo

• racadm getsensorinfo -c

Input -c — Compact output format.

NOTE: Chassis Controller is supported only on Dell PowerEdge FX2 and GPU sensors are displayed only on PowerEdge

C4130 servers.

Example

racadm getsensorinfo

Sensor Type : POWER

PS1 Status Present AC

Sensor Type : TEMPERATURE

<Status> <Reading> <lc> <uc> <Inc>[R/W] <Unc>[R/W]

System Board Inlet

Temp

Ok 20 C -7 C 47 C 3 C [Y] 42C [Y]

System Board

Exhaust Temp

Ok 19 C 0 C 75 C 0 C [N] 70 C [N]

CPU1 Temp Ok 59 C 3 C 97 C 8 C [N] 92 C [N]

Sensor Type : FAN

System Board

Fan1 RPM

Ok 5880 RPM 600 RPM NA 21%