Reference Guide

"10.94.192.67"
"0.0.0.0"
"1"
gettracelog
Description
Lists all the trace login entries of iDRAC.
Synopsis
• racadm gettracelog [-i]
• racadm gettracelog [-s <start>] [-c <count>] [--more]
Input
• —i — Displays the number of entries in iDRAC trace log.
• --more — Displays one screen at a time and prompts the user to continue (similar to the UNIX more
command).
• -c — Species the number of records to display.
• -s — Species the starting record to display.
Output
The default output display shows the record number, timestamp, source and description. The timestamp begins
at midnight, January 1 and increases until the system starts. After the system starts, the system’s timestamp is
used.
Example
• Display entire log
racadm gettracelog
• Display number of records in log
racadm gettracelog -i
Total Records: 228
getversion
Description
Displays the current software version, model and generation information, and whether the target device can
be updated.
Synopsis
• racadm getversion [-b | -c]
• racadm getversion
Input
• -c — Displays the server's current CPLD version.
• -b — Displays the server's current BIOS version (default is iDRAC version).
• -f <filter> — Filters the components and must be one of the following values:
– bios: BIOS
– idrac: iDRAC
– lc: Lifecycle Controller
Example
• Displays the version for server 4.
racadm getversion -m server-4
• Displays the Lifecycle Controller component versions for servers 1 and 3.
racadm getversion -l -m server-1 -m server-3
racadm getversion -c
44