Reference Guide

AvailableProtocols SAS
MediaType HDD
ReadPolicy Read Ahead
WritePolicy Write Back
StripeSize 64K
DiskCachePolicy Default
BadBlocksFound NO
Secured NO
RemainingRedundancy 0
EnhancedCache Not Applicable
T10PIStatus Disabled
BlockSizeInBytes 512
– To generate and view information about the inventory of storage enclosures connected to the connector.
This command displays all enclosure objects for the connector FQDD.
racadm storage get enclosures -o
Enclosure.Internal.0-1:RAID.Integrated.1-1
Status Ok
State Ready
DeviceDescription Backplane 1 on Connector 0 of Integrated
RAID Controller 1
RollupStatus Ok
Name BP13G+EXP 0:1
BayId 1
FirmwareVersion 0.23
SasAddress 0x500056B31234ABFD
SlotCount 24
The following command displays all enclosure keys connected to the connectors:
racadm storage get enclosures --refkey RAID.Integrated.1-1
Enclosure.Internal.0-1:RAID.Integrated.1-1
The following command is an optimized and ltered version:
racadm storage get enclosures --refkey RAID.Integrated.1-1 -o -p Name
Enclosure.Internal.0-1:RAID.Integrated.1-1
Name = BP12G+EXP 0:1
– To generate and view information about the inventory of physical disk drives connected to the enclosure or backplanes, run
the following command:
racadm storage get pdisks
Disk.Bay.0:Enclosure.Internal.0-1:RAID.Integrated.1-1
The following command is an optimized version and displays the full controller objects along with their keys:
racadm storage get pdisks -o
racadm storage get pdisks
83