Reference Guide

swinventory
Description Displays the list of software objects and associated properties installed on a server.
NOTE: Lifecycle Controller and CSIOR may not be enabled to run this subcommand.
Synopsis
racadm swinventory
Input
racadm swinventory
Output
racadm swinventory
------------------SOFTWARE INVENTORY-------------------
ComponentType = FIRMWARE
ElementName = Power Supply.Slot.2
FQDD = PSU.Slot.2
InstallationDate = 2013-06-11T13:02:46Z
Current Version = 07.2B.7D
---------------------------------------------------------------
ComponentType = FIRMWARE
ElementName = Integrated Remote Access Controller
FQDD = iDRAC.Embedded.1-1
InstallationDate = NA
Rollback Version = 1.50.50
----------------------------------------------------------------
ComponentType = FIRMWARE
ElementName = Integrated Remote Access Controller
FQDD = iDRAC.Embedded.1-1
InstallationDate = 2013-06-11T13:02:48Z
Current Version = 1.50.50
NOTE: Conguration changes and rmware updates that are made within the operating system may not reect properly
in the inventory until you perform a server restart.
systemcong
Description
Enables you to perform the following:
• Backup and restore for iDRAC and entire system conguration.
• Automatic scheduling of backup operation.
• View the auto backup feature settings.
• Clear the auto backup feature settings.
NOTE:
• To run this subcommand, you require the Server Prole Export and Import license.
• Backup operation is licensed (Enterprise) but restore operation is not licensed.
• If Lifecycle Controller is disabled, starting a restore operation is unsuccessful.
• If CSIOR is disabled, the system inventory can have old data during the backup operation. An
appropriate warning message is displayed.
• The autobackupscheduler can be enabled or disabled. For more information about enable or
disable, see LifecycleController.LCAttributes.autobackup
• The minimum Lifecycle Controller version 1.3 is required.
Synopsis
• racadm systemconfig backup -f <filename> <target> [-n passphrase] [-l
<location> -u <user name> -p <password>] [--vFlash]
• racadm systemconfig restore -f <filename> <target> [-n passphrase ] [--
nopreserve] [-l <location> -u <user name> -p <password>] [--vFlash]
89