Reference Guide

• racadm systemerase bios,idrac,lcdata

systemperfstatistics

Description Allows you to view and manage the system performance monitoring operations.

Synopsis

• To view the FQDD's of system performance monitoring sensors

racadm systemperfstatistics view

• To list the usage statistics of a specic sensor

racadm systemperfstatistics <sensor_FQDD>

• To reset the utilization peaks of system performance monitoring sensors

racadm systemperfstatistics PeakReset <FQDD>

• To run the peakreset operation you must have congure iDRAC privilege.

Examples:

• To view the FQDD's of system performance monitoring sensors

racadm systemperfstatistics view

[key = iDRAC.Embedded.1#SystemBoardCPUUsageStat]

[key = iDRAC.Embedded.1#SystemBoardIOUsageStat]

[key = iDRAC.Embedded.1#SystemBoardMEMUsageStat]

[key = iDRAC.Embedded.1#SystemBoardSYSUsageStat]

• To list the usage statistics of a specic sensor

racadm systemperfstatistics iDRAC.Embedded.1#SystemBoardCPUUsageStat

Minimum Readings

Last Hour = 0% [At Mon, 05 May 2014 17:13:04]

Last Day = 0% [At Mon, 05 May 2014 15:59:53]

Last Week = 0% [At Mon, 05 May 2014 15:59:53]

Maximum Readings

Last Hour = 0% [At Thu, 01 Jan 1970 00:00:00]

Last Day = 0% [At Thu, 01 Jan 1970 00:00:00]

Last Week = 0% [At Thu, 01 Jan 1970 00:00:00]

Average Readings

Last Hour = 0%

Last Day = 0%

Last Week = 0%

Peak Readings

Last Week 0% [At Mon, 05 May 2014 15:58:35]

• To reset the peak utilization of a specic sensor

racadm systemperfstatistics PeakReset iDRAC.Embedded.1#SystemBoardCPUUsageStat

RAC1163: The peak utilization value of Out-Of-Band performance monitoring sensor CPU

Usage is successfully reset.

techsupreport

Description

Allows you to perform the technical support report operations. The type of operations are:

• collect — Collects the technical support report data to export. You can specify the various types of logs

to be included in the report.

This operation generates a Job ID. Use this Job ID to check the status of the collect operation. To run this

operation, you must have the Server Control Commands permission.