Users Guide
Table Of Contents
- Lifecycle Controllerユーザーズ ガイド
- 目次
- はじめに
- Lifecycle Controller の使用
- Operating system deployment
- 監視
- ファームウェアアップデート
- 設定
- システムコントロールパネルのアクセスオプション
- iDRAC の設定
- システム時刻と日付の設定
- RAID の設定
- ソフトウェア RAID を使用した RAID の設定
- RAID コントローラ上でのセキュアな仮想ディスクの作成
- Key encryption
- ローカルキー暗号化モード
- ミラードライブの解除
- System setup — Advanced Hardware Configuration
- Collect System Inventory On Restart
- ローカル USB ドライブの設定
- NFS および CIFS サーバーの設定
- Conditions while configuring HTTP or HTTPS server
- 保守
- 使いやすいシステムコンポーネント名
- セットアップユーティリティとブートマネージャの使用
- トラブルシューティングとよくあるお問い合わせ(FAQ)
オプション 説明
メモ: [Custom](カスタム)モードで [C States] が [Enabled](有効)に設定されている場合に、
Monitor/Mwait 設定を変更しても、システムの電力またはパフォーマンスは影響を受けません。
[ メモリ巡回スクラ
ブ]
メモリ巡回スクラブの周波数を設定します。デフォルトでは、このオプションは [Standard(標準)] に設
定されています。
[メモリリフレッシ
ュレート]
メモリリフレッシュレートを 1x または 2x に設定します。デフォルトでは、このオプションは [1x] に設定
されています。
[メモリ動作電圧] DIMM 電圧を設定します。自動 に設定すると、システムが DIMM 容量と取り付けられている DIMM の枚数
に応じて、システム電圧を最適に自動設定します。メモリ動作電圧 オプションは、デフォルトで 自動 に設
定されています。
[CPU パフォーマン
ス協調制御]
CPU 電力の管理の有効 / 無効を切り替えます。Enabled(有効) に設定すると、CPU 電力の管理が OS DBPM
およびシステムの DBPM(DAPC)によって制御されます。このオプションは、デフォルトで [Disabled](無
効)に設定されています。
System security screen
Menu Item
Description
Intel AES-NI Improves the speed of applications by performing encryption and decryption using the Advanced Encryption
Standard Instruction Set and is set to Enabled by default.
System Password Allows you to set the system password. This option is set to Enabled by default and is read-only if the password
jumper is not installed in the system.
Setup Password Allows you to set the setup password. This option is read-only if the password jumper is not installed in the
system.
Password Status Allows you to lock the system password. By default, the Password Status option is set to Unlocked.
TPM Security Allows you to control the reporting mode of the Trusted Platform Module (TPM). By default, the TPM Security
option is set to Off. You can only modify the TPM Status, TPM Activation , and Intel TXT fields if the TPM Status
field is set to either On with Pre-boot Measurements or On without Pre-boot Measurements.
NOTE: TPM update is blocked form LC UI.
TPM Activation Allows you to change the operational state of the TPM. By default, the TPM Activation option is set to No
Change.
TPM Status Displays the TPM status.
TPM Clear
CAUTION: Clearing the TPM results in the loss of all keys in the TPM. The loss of TPM keys may
affect booting to the operating system.
Allows you to clear all the contents of the TPM. By default, the TPM Clear option is set to No.
Intel TXT Allows you to enable or disable Intel Trusted Execution Technology (TXT). To enable Intel TXT, Virtualization
Technology must be enabled and TPM Security must be Enabled with Pre-boot measurements. By default, the
Intel TXT option is set to Off.
BIOS Update
Control
Allows you to update the BIOS using either DOS or UEFI shell-based flash utilities. For environments that do not
require local BIOS updates, it is recommended to set this option to Disabled. By default, the BIOS Update Control
option is set to Unlocked.
NOTE: BIOS updates using the Dell Update Package are not affected by this option.
Power Button Allows you to enable or disable the power button on the front of the system. By default, the Power Button option
is set to Enabled.
NMI Button Allows you to enable or disable the NMI button on the front of the system. By default, the NMI Button option is
set to Disabled.
AC Power
Recovery
Allows you to set how the system reacts after AC power is restored to the system. By default, the AC Power
Recovery option is set to Last.
68 セットアップユーティリティとブートマネージャの使用