Owners Manual

Removing and Installing System Components | 245
2. Remove the air baffle. See “Removing the Air Baffle” on page 174.
3. When removing the memory module from the system equipped
with the RAID battery assembly, remove the RAID battery
assembly first. See “Removing the LSI 9265-8i RAID battery
Assembly” on page 214.
Locate the memory module sockets. See Figure 3-64.
CAUTION: Handle each memory module only on either card edge, making sure
not to touch the middle of the memory module. To avoid damaging
components on the memory module, remove only one memory module at a
time.
4. Simultaneously press down and out on the ejectors at both ends
of the memory module socket until the memory module is
released from the socket. See Figure 3-64.
5. Lift the memory module out of the socket by contact only at the
ends of the module. See Figure 3-64.
Figure 3-64. Removing a Memory Module
1
memory module
2
memory module socket ejector (2)