Owners Manual

Removing and Installing System Components | 253
Installing the DCS6300 System Board on the C6220 II System
CAUTION: C6220 II and DCS6300 system boards are similar. However,
DCS6300 system board is not supported in C6220 II. Check the system board
before installing.
If you install a DCS6300 system board on a C6220 II system, system
alerts you in two ways:
1. System identification indicators on the front and back of the
chassis turn amber. See Figure 3-68 and Figure 3-69 for the
locations and behavior descriptions. For more information on
the front and back panels, see “Front-Panel Features and
Indicators” and “Back Panel Features and Indicators”.
Figure 3-68. System identification indicator/button on Front Panel−3.5”
x12 Hard Drives with Four System Boards Shown
(C6220/C6220 II RAID Card & Onboard SATA Controller)
Item Indicator, Button
Or Connector
Icon Description
1 System identification
indicator/ button for system
board 1
The identification button
can be used to locate a
particular system and
system board within a
chassis.
When the button is pushed,
the system’s blue status
indicator on the front and
back blink until the button
is pushed again.
2 System identification
indicator/ button for system
board 2
3
System identification
indicator/ button for system
board 4
4 System identification
indicator/ button for system
board 3