Owners Manual

94 | Using the System Setup Program
Option
Description
Embedded SATA Link Rate
(Auto default)
Auto – Sets the SATA link rate at maximum as 6.0
Gbps.
1.5 Gbps – Sets the SATA link rate at minimum as
1.5 Gbps. For power consumption.
3.0 Gpbs – Sets the SATA link rate at minimum as
3.0 Gbps.
SATA Port 0
(Auto default)
Off – Sets the 1st Serial ATA drive controller to
Off.
Auto – Sets the 1st Serial ATA drive controller to
Auto (enabled if present, POST error if not
present).
SATA Port 1
(Auto
default)
Off – Sets the 2nd Serial ATA drive
controller to Off.
Auto – Sets the 2nd Serial ATA drive controller to
Auto (enabled if present, POST error if not
t)
SATA Port 2
(Auto
default)
Off – Sets the 3rd Serial ATA drive controller to
Off.
Auto – Sets the 3rd Serial ATA drive controller to
Auto (enabled if present, POST error if not
present).
SATA Port 3
(Auto default)
Off – Sets the 4th Serial ATA drive controller to
Off.
Auto – Sets the 4th Serial ATA drive controller to
Auto (enabled if present, POST error if not
present).
SATA Port 4
(Auto default)
Off – Sets the 5th Serial ATA drive controller to
off.
Auto –Sets the 6th Serial ATA drive controller to
Auto (enabled if present, POST error if not
present).
SATA Port 5
(Auto default)
Off – Sets the 6th Serial ATA drive controller to
off.
Auto –Sets the 6th Serial ATA drive controller to
Auto (enabled if present, POST error if not