Users Guide

Table Of Contents

Getting Started With Your System | 4

Push on the latch release buttons on the midpoints of the end piece to

open the rail latches. See Figure 1.

Align the end pieces of the rails on the vertical rack flanges to seat the

pegs in the bottom hole of the first U and the top hole of the second

NOTE:

The rails can be used in both square-hole (item 1 in the following figure)

and round-hole racks (item 2 in the following figure).

Figure 1. Pushing the Latch Release Buttons

NOTE:

To remove the rails, push on the latch release button on the midpoints

of the end piece and unseat each rail.