Owners Manual

Keystroke Description
Ctrl+Y Enters the MegaPCLI SAS RAID Management Tool.
Ctrl+S Enters the utility to configure onboard LAN settings for PXE boot. For more information, see the
documentation for your integrated LAN.
Ctrl+I Enters onboard SATA Controller’s Configuration Utility.
Ctrl+D Enters the Intel iSCSI setup menu.
Front panel features and indicators
Figure 2. Front panel − 3.5-inch x12 hard drives with four system boards (C6320 RAID card and onboard SATA
controller)
Figure 3. Front panel − 2.5-inch x24 hard drives with four system boards (C6320 RAID card and onboard SATA
controller)
NOTE:
For more information about the direction details of the 2.5-inch hard drive expander configuration support, see the
HDD Zoning configuration tool at Dell.com/support.
Table 1. Front panel features and indicators
Item Indicator, button or connector Icon Description
1
Power-on indicator or system state
indicator or power button for system
board 1
The power-on indicator turns to green when the
system power is on.
The power-on indicator turns to amber when the
system critical event occurs.
The power button controls the DC power supply output
to the system.
NOTE: When turning on the system, the video
monitor can take from several seconds to over two
minutes to display an image, depending on the
number and capacity of DIMMs installed in the
system.
NOTE: On ACPI-compliant operating systems
(OSs), turning off the system by using the power
button causes the system to perform a graceful
shutdown before power to the system is turned off.
3
Power-on indicator or system state
indicator or power button for system
board 2
7
Power-on indicator or system state
indicator or power button for system
board 4
9
Power-on indicator or system state
indicator or power button for system
board 3
10 Dell PowerEdge C6320 product overview