Owners Manual

Figure 70. Replacing the system battery
a. system battery
b. negative side of battery connector
c. battery latch
Next steps
1. Replace the system board assembly.
2. Reconnect the system to the electrical outlet.
3. Turn on the system, including any attached peripherals.
4. Enter System Setup to confirm that the battery is operating properly. See the System setup section.
5. In System Setup, enter correct time and date in the Time and Date fields.
6. Exit System Setup.
Related concepts
System Setup on page 34
Related references
Safety instructions on page 62
Related tasks
Removing a sled on page 87
Removing the cooling shroud on page 90
Removing the expansion card on page 97
Installing a sled on page 89
System board
Removing a system board
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
Installing and removing system components 119