Owners Manual

Back panel features and indicators
Figure 6. Back panel with four system boards
Table 3. Back panel features and indicators
Item Indicator, button, or connector Icon Description
1 PSU 2 Up to 1400 W AC, 1600 W AC, or
1400 HVDC PSUs.
2 PSU 1 Up to 1400 W AC, 1600 W AC, or
1400 HVDC PSUs.
3 USB port Enables you to connect USB devices
to the system. The ports are USB
3.0-compliant.
4 Ethernet connector 10G NIC 1 connector.
5 Ethernet connector 10G NIC 2 connector.
6 Management port Dedicated management port.
7 USB to serial port Connects the system to a host.
8 VGA port Connects a VGA display to the
system.
9 Power button/power and system LED
The power-on indicator glows green
when the system power is on.
The power-on indicator turns amber
when the system critical event
occurs.
The power button controls the DC
PSU output to the system.
NOTE: When turning on the
system, the video monitor can
take from several seconds to over
two minutes to display an image,
on the basis of the disk space
available in the system.
NOTE: On ACPI-compliant
operating systems, turning off the
system by using the power button
causes the system to perform a
Dell PowerEdge C6320 product overview 13